Join 60,000+ competitive exam aspirants
Transposition of transmission line is done to reduce
Line losses
Capacitive effect
Disturbances to nearby communication lines
Effect of Surge voltages induced on the line
Disturbances to nearby communication lines
Transposition is the process of interchanging the physical positions of conductors at regular intervals along a transmission line. This technique ensures that each conductor occupies all three physical positions (A, B, and C) over the length of the line, thereby balancing the line impedances.
Transposition is the process of interchanging the physical positions of conductors at regular intervals along a transmission line. This technique ensures that each conductor occupies all three physical positions (A, B, and C) over the length of the line, thereby balancing the line impedances.
VresidualтАЛтИЭтИСIphasesтАЛ тАФ Represents the imbalance voltage
LavgтАЛ=31тАЛ(L11тАЛ+L22тАЛ+L33тАЛ) тАФ Represents the balanced average inductance per phase
In an untransposed three-phase line, the unequal spacing between conductors results in unequal self and mutual inductances and capacitances. This imbalance causes unequal voltage drops and currents in the phases, leading to an unbalanced residual current and magnetic flux. By transposing the line, the average inductance and capacitance per phase become equal, neutralizing the residual magnetic field that would otherwise induce interference in nearby communication circuits.
Transposition eliminates the unbalanced voltage and current components.
It minimizes electromagnetic induction interference on parallel communication lines.
It is primarily used in long-distance, high-voltage overhead transmission lines.
The line is typically divided into three equal sections for transposition.
Reduces electromagnetic interference with telecommunication lines
Balances the phase inductances and capacitances
Improves voltage regulation across phases
Increases structural complexity at transposition towers
Higher costs due to special hardware requirements
Long-distance EHV (Extra High Voltage) transmission lines
Power systems with parallel communication circuits
Option A is incorrect because transposition does not significantly change ohmic (I┬▓R) losses.
Option B is incorrect as capacitive effects are managed by design, but transposition mainly addresses inductive imbalance.
The residual current in an untransposed line acts as a source of noise via induction in nearby copper-wire communication circuits.
C is correct тАФ Transposition balances the phases to neutralize the net magnetic field, thereby preventing electromagnetic interference in adjacent communication lines.
Always remember that transposition is about symmetry; if a line is perfectly symmetric, the sum of phase currents (assuming balance) creates zero net flux at a distance, preventing interference.