Join 60,000+ competitive exam aspirants
Transposition of transmission line is done to
Reduce line losses
Reduce skin effect
Balance line voltage drop
Reduce corona
Balance line voltage drop
Transposition is the process of interchanging the physical positions of conductors at regular intervals along a transmission line. This ensures that the inductive and capacitive reactances are balanced across all phases over the total length of the line.
Transposition is the process of interchanging the physical positions of conductors at regular intervals along a transmission line. This ensures that the inductive and capacitive reactances are balanced across all phases over the total length of the line.
LavgтАЛ=2├Ч10тИТ7ln(GMRGMDтАЛ) тАФ average inductance per phase
CavgтАЛ=ln(reqтАЛGMDтАЛ)2╧А╧╡тАЛ тАФ average capacitance per phase
In untransposed lines, the conductors occupy different positions relative to each other, leading to unequal self and mutual inductances and capacitances. By cycling conductors through the three positions (A-B-C, B-C-A, C-A-B), the average impedance of each phase becomes identical. This prevents the flow of unbalanced currents and reduces interference with adjacent communication circuits.
Transposition balances the unsymmetrical spacing of conductors.
It eliminates the unbalanced voltage drops caused by asymmetrical mutual inductance.
It reduces inductive interference with parallel telephone/communication lines.
Required primarily for long EHV (Extra High Voltage) transmission lines.
Equalizes phase voltage drops
Minimizes communication line interference
Reduces residual current due to phase imbalance
Increases structural complexity at transposition towers
Increases cost of installation and maintenance
High-voltage long-distance transmission lines
Systems with asymmetrical conductor geometry
Option A (Line losses) is incorrect as transposition does not directly reduce I2R losses significantly.
Option B (Skin effect) is managed by conductor bundling or using ACSR conductors, not transposition.
Option D (Corona) is reduced by increasing conductor diameter or using bundled conductors, not transposition.
C is correct тАФ Transposition is employed to balance the inductive and capacitive parameters of the transmission line, ensuring equal voltage drops across all phases.
Always remember that transposition is an asymmetry compensation technique; it does not change the physical material or diameter of the conductor.