Join 60,000+ competitive exam aspirants
Varley loop tests are performed over Murray loop test because
Varley loop test can locate open circuit fault
Varley loop test gives higher accuracy
Varley loop test provides measurement of total loop resistance
Varley loop test can locate earth fault
Varley loop test provides measurement of total loop resistance
The Varley loop test is a bridge-based method for fault location in underground cables that utilizes an adjustable external resistance connected in series with the faulted cable. Unlike the Murray loop test, it allows for the calculation of the total loop resistance (RLтАЛ) in addition to the fault distance, making it more robust when the cable temperature or cross-section is uncertain.
The Varley loop test is a bridge-based method for fault location in underground cables that utilizes an adjustable external resistance connected in series with the faulted cable. Unlike the Murray loop test, it allows for the calculation of the total loop resistance (RLтАЛ) in addition to the fault distance, making it more robust when the cable temperature or cross-section is uncertain.
RxтАЛ=RAтАЛ+RBтАЛ+S2тАЛтИТS1тАЛRLтАЛ(S2тАЛтИТS1тАЛ)тАЛ тАФ represents the fault location relative to the test end
RLтАЛ=Rcable1тАЛ+Rcable2тАЛ тАФ represents total loop resistance measured
In the Varley loop test, the bridge is balanced by varying an external resistance 'S' placed in the faulty leg. By taking two separate readingsтАФone with a short circuit at the far end and one with the cable connected normallyтАФthe operator can determine both the resistance of the loop and the fault location. This eliminates errors caused by changes in lead resistance or ambient conditions affecting the conductor resistance.
Varley loop is preferred when the total resistance of the cable is not accurately known.
The method uses a Wheatstone bridge configuration.
It is essentially a modification of the Murray loop test.
Requires knowledge of the resistance per unit length of the conductor.
Does not require accurate knowledge of total conductor resistance.
Less affected by variations in temperature along the cable length.
Requires more calculation steps compared to Murray loop.
Limited effectiveness if the fault resistance itself is extremely high.
Location of ground faults in power cables.
Industrial cable diagnostic testing.
| Feature | Murray Loop | Varley Loop |
|---|---|---|
Measured Value | Only fault ratio | Total loop resistance + fault |
Murray loop is simpler for uniform cables where the resistance is well-documented.
Option A is incorrect because neither test is suitable for 'open' circuits; they are designed for 'ground' or 'short' faults.
C is correct тАФ Varley loop test provides measurement of total loop resistance, which is its primary advantage over the Murray loop test.
Always remember: Murray loop is for ratio-based location, Varley is for resistance-based location when cable parameters are uncertain.