Join 60,000+ competitive exam aspirants
Water is supplied to the boiler at
Atmospheric pressure
More than steam pressure in the boiler
Slightly more than atmospheric pressure
Any pressure
More than steam pressure in the boiler
To supply water into a steam boiler that is already operating under high pressure, the feed water must be delivered at a pressure greater than the internal steam pressure. This pressure differential ensures that the feed check valve opens against the boiler pressure, allowing the water to enter the drum.
To supply water into a steam boiler that is already operating under high pressure, the feed water must be delivered at a pressure greater than the internal steam pressure. This pressure differential ensures that the feed check valve opens against the boiler pressure, allowing the water to enter the drum.
PfeedтАЛ>PboilerтАЛ тАФ Condition for feed water injection
The feed water system utilizes a feed pump (such as a centrifugal or reciprocating pump) to increase the pressure of the feedwater above the boiler's rated steam pressure. If the feedwater pressure were equal to or lower than the boiler pressure, the check valve would remain closed, preventing any inflow and potentially leading to a dry-running condition or boiler explosion.
The Feed Check Valve (FCV) is a non-return valve allowing one-way flow.
Boiler feed pumps are specifically selected based on the maximum operating steam pressure.
Safety regulations require the pump discharge pressure to be significantly higher than the boiler set point to account for pipe friction and control valve drops.
Prevents backflow of steam into the feed line
Ensures continuous operation and water level maintenance
Requires high-powered pumps to overcome boiler pressure
Increased wear on feed check valve seats
Thermal Power Plants
Industrial Steam Boilers
Marine Propulsion Boilers
If feed pressure is lower than boiler pressure, the boiler water would be forced back into the feed line, potentially damaging the pump.
Option A and C are incorrect as they would fail to overcome the internal steam pressure, preventing water entry.
B is correct тАФ Water must be supplied at a pressure higher than the boiler's internal steam pressure to overcome the opposing force exerted by the steam and to open the non-return feed check valve.
Always remember that in fluid systems, flow only occurs from high pressure to low pressure; hence, to fill a pressurized vessel, the inlet supply must be the highest pressure point in that specific segment.