Join 60,000+ competitive exam aspirants
What is the concept of notching operation?
process of decreasing the voltage
process of increasing the efficiency
process of cutting out the resistance
process of adding on the resistance
process of cutting out the resistance
In electrical motor starters and field regulators, particularly for traction motors, 'notching' or 'notching operation' refers to the step-by-step cutting out (short-circuiting) of external starting resistance from the armature circuit. As the motor accelerates and builds up back EMF, the resistance is removed in notches to maintain the starting current within permissible limits without causing torque fluctuations.
In electrical motor starters and field regulators, particularly for traction motors, 'notching' or 'notching operation' refers to the step-by-step cutting out (short-circuiting) of external starting resistance from the armature circuit. As the motor accelerates and builds up back EMF, the resistance is removed in notches to maintain the starting current within permissible limits without causing torque fluctuations.
IaтАЛ=RaтАЛ+RextтАЛVтИТEbтАЛтАЛ тАФ Armature current during motor acceleration
EbтАЛ=60A╬жZNPтАЛ тАФ Back EMF opposing the supply voltage
During the startup of a DC motor, the back EMF (EbтАЛ) is zero, resulting in a high starting current (IaтАЛ=RaтАЛ+RextтАЛVтИТEbтАЛтАЛ). To prevent damage, external resistance RextтАЛ is inserted into the circuit. As the motor gains speed, EbтАЛ increases and current decreases; the operator or controller then cuts out sections of RextтАЛ step-by-step (notches) until the motor runs directly on line voltage with all external resistance bypassed.
Notching avoids sudden current spikes by cutting resistance in steps rather than all at once.
Commonly used in electric traction (locomotives, trams) during the acceleration phase.
Notching controllers use contactors or drum switches to short-circuit external resistors incrementally.
Smooth speed acceleration without severe mechanical jerks.
Protects armature winding from overcurrent damage during startup.
Energy is wasted as heat in starting resistances during the notching process.
Requires complex multi-step switching mechanisms.
DC Series Motor Starters in Electric Traction Systems.
Heavy-duty industrial motor drive acceleration control.
Option A is incorrect because notching modifies circuit resistance, not the supply voltage magnitude.
Option B is incorrect because resistance control actually wastes power in resistors, temporarily reducing startup efficiency.
Option D is incorrect because adding resistance decreases current further, whereas notching cuts out resistance to allow higher speed.
C is correct тАФ Notching operation refers to step-by-step cutting out of starting resistance from the motor circuit during acceleration.
In traction systems, series-parallel control is combined with notching to minimize energy loss across starting resistors during acceleration.