Join 60,000+ competitive exam aspirants
What will be the eddy current loss if the supply frequency of a transformer becomes double?
Eight times
Four times
Doubled
Remains the same
Four times
Eddy current loss (PeтАЛ) in a transformer core is directly proportional to the square of the frequency (f2) when the supply voltage is constant. Doubling the supply frequency results in a quadrupling of the eddy current losses, represented as PeтАЛтИЭf2.
Eddy current loss (PeтАЛ) in a transformer core is directly proportional to the square of the frequency (f2) when the supply voltage is constant. Doubling the supply frequency results in a quadrupling of the eddy current losses, represented as PeтАЛтИЭf2.
PeтАЛ=KeтАЛf2Bmax2тАЛt2 тАФ Mathematical expression for eddy current loss
PeтАЛтИЭf2 тАФ Relationship between frequency and eddy current loss
Eddy currents are circulating currents induced in the conductive transformer core due to the varying magnetic flux, governed by Faraday's Law of Induction. Since the induced EMF is proportional to the rate of change of flux (d╬ж/dt), increasing the frequency increases the induced voltage within the core material. Because the resistance of the core path is constant, the power dissipated as heat follows the I2R relationship, which manifests as a squared dependency on frequency.
Eddy current losses are caused by circulating currents induced by changing magnetic fields.
Laminating the transformer core is the primary method to reduce eddy current paths and minimize losses.
The squared frequency dependence makes eddy current losses highly sensitive to supply frequency fluctuations.
High efficiency in power transmission
Effective regulation of voltage levels
Heat generation in core material
Power dissipation leading to reduced transformer efficiency
Electrical power grid distribution
Industrial power supply conversion
Note: This assumes the peak magnetic flux density (BmaxтАЛ) remains constant (i.e., V/f ratio remains constant).
Option A is incorrect because the frequency dependence is squared, not cubic.
Option C is incorrect as it describes linear proportionality, which applies to frequency-independent variables, not eddy current losses.
B is correct тАФ Eddy current loss is proportional to the square of the frequency (PeтАЛтИЭf2), so doubling the frequency leads to a factor of 22=4.
Always remember: Hysteresis loss (PhтАЛтИЭf1) is linearly proportional to frequency, whereas eddy current loss (PeтАЛтИЭf2) is proportional to the square of the frequency.