Join 60,000+ competitive exam aspirants
When a transformer is loaded, the secondary terminal voltage drops. That means the load Power factor is
Zero
Leading
Unity
Lagging
Lagging
When a transformer is loaded with a lagging power factor load, the internal voltage drop due to the resistance and leakage reactance of the windings causes the secondary terminal voltage to be lower than the no-load voltage. This is primarily due to the armature reaction effect where the lagging current produces a demagnetizing effect that reduces the net flux.
When a transformer is loaded with a lagging power factor load, the internal voltage drop due to the resistance and leakage reactance of the windings causes the secondary terminal voltage to be lower than the no-load voltage. This is primarily due to the armature reaction effect where the lagging current produces a demagnetizing effect that reduces the net flux.
V2тАЛ=E2тАЛтИТI2тАЛ(ReqтАЛcos╧Х+XeqтАЛsin╧Х) тАФ Secondary terminal voltage equation for lagging load
%Regulation=E2тАЛE2тАЛтИТV2тАЛтАЛ├Ч100 тАФ Percentage voltage regulation formula
The transformer secondary terminal voltage is given by V2тАЛ=E2тАЛтИТI2тАЛ(ReqтАЛcos╧Х+XeqтАЛsin╧Х), where ╧Х is the phase angle of the load. For a lagging load, ╧Х is positive, leading to a significant voltage drop across the equivalent impedance. In contrast, for leading loads, the I2тАЛXeqтАЛsin╧Х term becomes negative, which can potentially cause the output voltage to rise above the no-load value (Ferranti-like effect in transformers).
Lagging power factor causes a larger voltage drop due to the inductive reactance of the windings.
Unity power factor results in a smaller voltage drop influenced only by the resistance.
Leading power factor can result in a voltage rise (negative regulation) in transformers.
Transformer regulation is defined as the change in secondary terminal voltage from no-load to full-load.
Predictable voltage regulation behavior
Easier compensation using capacitor banks
Excessive voltage drop leads to poor performance of connected equipment
Increases I2R losses due to higher reactive current components
Distribution transformers
Power transmission networks
For a purely resistive load (Unity PF), sin╧Х=0, so the voltage drop is mainly due to I2тАЛReqтАЛ.
Option B (Leading) typically causes a voltage rise, whereas Option C (Unity) results in minimal drop compared to Lagging.
D is correct тАФ The lagging power factor load causes a voltage drop in the transformer due to the combined effect of internal resistance and inductive reactance drops.
Always remember that for a transformer, 'Lagging' load corresponds to positive voltage regulation, while 'Leading' load can result in negative regulation.