Join 60,000+ competitive exam aspirants
Whenever the conductor are dead-ended or there is a change in the direction of transmission line, insulators used are of the
Pin type
Suspension type
Strain type
Shackle type
Strain type
Strain insulators are specifically designed to withstand the high mechanical tension and longitudinal loads experienced at dead-end towers, sharp corners, or long spans. When a conductor is terminated at a dead-end point, the insulator must support the full tensile force of the conductor, which standard pin or suspension insulators are not mechanically reinforced to handle in the horizontal direction.
Strain insulators are specifically designed to withstand the high mechanical tension and longitudinal loads experienced at dead-end towers, sharp corners, or long spans. When a conductor is terminated at a dead-end point, the insulator must support the full tensile force of the conductor, which standard pin or suspension insulators are not mechanically reinforced to handle in the horizontal direction.
TtotalтАЛ=TconductorтАЛ тАФ Mechanical load equilibrium at dead-end points
FnetтАЛ=T12тАЛ+T22тАЛтИТ2T1тАЛT2тАЛcos(╬╕)тАЛ тАФ Resultant force at a line angle deviation
Unlike suspension insulators that hang vertically to support the conductor weight, strain insulators are placed in a horizontal or inclined position. They provide a high-strength mechanical connection between the tower cross-arm and the conductor. By utilizing multiple discs in strings (for high voltage) or robust porcelain units, they distribute the longitudinal stress and ensure electrical isolation between the live conductor and the earthed tower structure.
Used at line terminals (dead-ends) and sharp turns.
Mechanical strength is the primary requirement for strain insulators.
Usually installed in a horizontal plane to counteract longitudinal tension.
For low voltage, shackle insulators are used; for high voltage, suspension strings are arranged in a horizontal orientation.
High mechanical tensile strength
Suitable for high-voltage line termination
Provides flexibility for tension adjustment
More expensive than simple pin-type insulators
Requires more space for installation on the cross-arm
Transmission line dead-end towers
Corners or bends in power lines
River crossings where high tension is involved
Option A (Pin type) is unsuitable as it cannot withstand high horizontal tension.
Option B (Suspension type) is primarily for vertical load bearing; they act as strain insulators only when oriented horizontally.
Option D (Shackle type) is primarily for low-voltage distribution lines.
C is correct тАФ Strain insulators are utilized specifically to bear the substantial mechanical tensile loads occurring at dead-end poles and line corners.
Always remember: Pin insulators are for vertical loads, Strain for horizontal (longitudinal) tension, and Shackle for low-voltage distribution.