Join 60,000+ competitive exam aspirants
Which type of insulators are used on 132 kV transmission lines?
Pin type
Disc type
Shackle type
Pin and Shackle type
Disc type
For transmission lines operating at high voltages like 132 kV, the electrical stress on the insulator is high, making pin-type insulators mechanically and electrically impractical. Instead, a string of suspension-type disc insulators is used to achieve the required insulation level through a series arrangement.
For transmission lines operating at high voltages like 132 kV, the electrical stress on the insulator is high, making pin-type insulators mechanically and electrically impractical. Instead, a string of suspension-type disc insulators is used to achieve the required insulation level through a series arrangement.
VstringтАЛ=V1тАЛ+V2тАЛ+...+VnтАЛ
╬╖=nтЛЕVmaxтАЛVtotalтАЛтАЛ
The suspension arrangement consists of multiple porcelain or glass discs connected in series via metal links. The total voltage withstand capability increases with the number of discs in the string. As the operating voltage increases, the number of discs in the string is increased to maintain a safe dielectric strength and prevent flashover.
Pin insulators are generally restricted to voltages up to 33 kV.
Disc insulators provide flexibility and allow for easy replacement of faulty units.
The number of discs in a 132 kV string typically ranges from 8 to 10 depending on the design and site conditions.
Suspension insulators are hung from the cross-arm of the transmission tower.
Higher voltage capacity by increasing number of discs
Mechanically robust and flexible
Easy to maintain and replace individual damaged units
Provides greater clearance to the tower
Requires taller towers compared to pin-type systems
Higher cost of installation and string assembly
Susceptible to string efficiency issues due to capacitance
132 kV, 220 kV, and 400 kV overhead transmission lines
High-voltage substations
Long-span river crossings
Standard porcelain disc units have a diameter of 254 mm (10 inches).
Shackle type insulators are used for low-voltage distribution lines (up to 11 kV) in dead-end or service connections.
Pin type insulators become bulky and uneconomical beyond 33 kV.
B is correct тАФ 132 kV lines utilize strings of disc insulators due to their modular design and superior electrical performance at high voltage levels.
Always remember that for voltages exceeding 33 kV, suspension strings (disc type) are the industry standard for transmission lines.