Join 60,000+ competitive exam aspirants
Which of the following faults occurs most frequently
phase fault
L-L-G fault
L-L fault
L-G fault
L-G fault
In power systems, the Single Line to Ground (L-G) fault is the most frequent type of fault, accounting for approximately 70% to 80% of all transmission line faults. These faults typically result from lightning strikes, insulation failure, or physical contact with ground objects.
In power systems, the Single Line to Ground (L-G) fault is the most frequent type of fault, accounting for approximately 70% to 80% of all transmission line faults. These faults typically result from lightning strikes, insulation failure, or physical contact with ground objects.
IfтАЛ=Z1тАЛ+Z2тАЛ+Z0тАЛVphтАЛтАЛ тАФ Fault current for an L-G fault using symmetrical components, where Z1тАЛ,Z2тАЛ,Z0тАЛ are positive, negative, and zero sequence impedances respectively.
An L-G fault occurs when one of the three phases comes into contact with the ground or a neutral conductor. This creates a low-impedance return path for the fault current. Because the path involves only one phase and earth, it is statistically more probable than multi-phase faults that require multiple conductors to bridge simultaneously.
L-G faults involve earth, making them the most common in overhead transmission lines.
Three-phase (3-╨д) faults are the most severe but least frequent.
Symmetrical components are used to analyze unbalanced faults like L-G, L-L, and L-L-G.
The neutral grounding method significantly influences the magnitude of L-G fault currents.
Most L-G faults are transient in nature and can be cleared by rapid reclosing.
Protection schemes are highly standardized for this fault type.
Can cause severe voltage unbalance in the system.
Can lead to high step and touch potentials near the fault location.
Design of distance relays and overcurrent protection settings.
Insulation coordination studies for power system grounding.
The frequency order of faults is generally: LтИТG>LтИТL>LтИТLтИТG>LтИТLтИТL.
Option A (Phase fault) is a general term often referring to L-L, which is less common than L-G.
D is correct тАФ The Single Line to Ground (L-G) fault is the most common fault in power systems due to environmental factors and exposure of conductors to ground objects.
Always remember the order of frequency: L-G is most frequent, while Three-phase (symmetrical) is the most severe.