Join 60,000+ competitive exam aspirants
Which of the following forces acts on the blade of a wind turbine rotor?
Lift force
Drag force
Both (a) and (b)
None of above
Both (a) and (b)
Wind turbine blades operate on aerodynamic principles where airflow creates a resultant force, which is decomposed into two primary components: lift and drag. Lift force acts perpendicular to the direction of the relative wind, providing the torque to drive the rotor, while drag force acts parallel to the wind direction, opposing the rotation.
Wind turbine blades operate on aerodynamic principles where airflow creates a resultant force, which is decomposed into two primary components: lift and drag. Lift force acts perpendicular to the direction of the relative wind, providing the torque to drive the rotor, while drag force acts parallel to the wind direction, opposing the rotation.
FLтАЛ=21тАЛ╧БAv2CLтАЛ тАФ Lift Force Equation
FDтАЛ=21тАЛ╧БAv2CDтАЛ тАФ Drag Force Equation
As air flows over the airfoil-shaped blades, a pressure difference is generated between the upper and lower surfaces (Bernoulli's principle) creating lift. Simultaneously, surface friction and pressure differences in the flow wake generate drag, which acts in the direction of the relative wind. The vector sum of these forces determines the overall aerodynamic load on the blade structure.
Lift is the primary force responsible for rotor rotation.
Drag force acts as a resistive force and must be minimized through airfoil optimization.
The Lift-to-Drag ratio (L/D) is a critical performance indicator for turbine blade efficiency.
Total aerodynamic force is the vector sum: F=FLтАЛтАЛ+FDтАЛтАЛ.
Lift-based designs allow for high tip-speed ratios.
Optimized blades maximize energy extraction from wind kinetic energy.
Excessive drag reduces overall turbine efficiency.
Structural fatigue occurs due to cyclic loading of lift and drag forces.
Horizontal Axis Wind Turbines (HAWT)
Vertical Axis Wind Turbines (VAWT)
Aerospace and Aviation wing design
The lift coefficient (CLтАЛ) and drag coefficient (CDтАЛ) are functions of the angle of attack.
Option A and B are both components of the total force; hence, C is the most comprehensive answer.
C is correct тАФ Both lift and drag forces are fundamental aerodynamic components acting on wind turbine blades, influencing power extraction and structural loading.
Always remember that while lift is necessary for rotation, the stall phenomenon (loss of lift at high angles of attack) is a crucial safety consideration in power control systems.