Join 60,000+ competitive exam aspirants
Wind power plants are required to have a large rotor size for a large power output due to
Low power density of air stream
Lift force acting perpendicular to the direction of wind flow
Lift force being more than drag force
Drag force acting perpendicular to lift force
Low power density of air stream
Wind power plants require large rotor sizes because air has low kinetic energy density compared to traditional fuels like coal or water. To extract a significant amount of power, the rotor must sweep a large area of the wind stream to capture enough mass flow.
Wind power plants require large rotor sizes because air has low kinetic energy density compared to traditional fuels like coal or water. To extract a significant amount of power, the rotor must sweep a large area of the wind stream to capture enough mass flow.
P=21тАЛ╧БAv3CpтАЛ тАФ Power extracted from wind (where P is power, ╧Б is air density, A is swept area, v is wind velocity, and CpтАЛ is power coefficient)
A=╧АR2 тАФ Area of the wind turbine rotor disk
The power available in wind is proportional to the cube of wind velocity and directly proportional to the swept area of the turbine blades. Since air density (╧Б) is relatively low (approximately 1.225kg/m3 at sea level), the only way to increase the power output for a given wind speed is to increase the swept area (A=╧Аr2).
Wind power is directly proportional to the area swept by the blades.
Air is a low-density fluid; therefore, large turbines are necessary to capture sufficient mass flow rate.
The kinetic energy of wind is governed by the v3 relationship, making velocity the most critical variable, but rotor size is the primary mechanical constraint for output.
Renewable and sustainable energy source
Zero emission of greenhouse gases during operation
Intermittent energy availability
Requires large land area for wind farms
Utility-scale electricity generation
Off-grid power for remote locations
Betz limit establishes that no turbine can capture more than 59.3% of the kinetic energy of wind.
Option B, C, and D describe the aerodynamic forces (lift and drag) acting on individual blade profiles, but the overall rotor size constraint is primarily dictated by power density and energy capture requirements.
A is correct тАФ The low power density of air requires a large swept rotor area to capture significant kinetic energy from the wind stream.
Always remember that for wind turbines, power scales with the square of the radius (R2); doubling the blade length quadruples the potential power output for a given wind speed.