Join 60,000+ competitive exam aspirants
Which of the following is neglected while analyzing a short transmission line
Shunt admittance
Power loss
Series impedance
None of above
Shunt admittance
In a short transmission line, the length is less than 80 km and the operating voltage is typically below 20 kV. Due to these limited dimensions, the charging current resulting from the line-to-line and line-to-ground capacitance is negligible; hence, the shunt admittance is ignored in the analysis.
In a short transmission line, the length is less than 80 km and the operating voltage is typically below 20 kV. Due to these limited dimensions, the charging current resulting from the line-to-line and line-to-ground capacitance is negligible; hence, the shunt admittance is ignored in the analysis.
Z=R+jX тАФ The series impedance representing the line parameters.
VsтАЛ=VrтАЛ+IrтАЛZ тАФ The voltage equation for a short line.
The transmission line is modeled using only its lumped series resistance (R) and series inductance (L). Because the capacitance to ground is distributed along the length of the line, its cumulative effect at these short distances is insignificant compared to the voltage drop caused by the series impedance. Therefore, the equivalent circuit is simplified to a single series RL branch.
Short lines are defined by lengths < 80 km.
Voltage levels for these lines are generally тЙд20 kV.
The shunt capacitance is considered negligible.
The model represents the line as a simple series lumped impedance.
Simple mathematical calculations.
Efficient for preliminary power flow estimation.
Inaccurate for long lines (> 250 km).
Neglects Ferranti effect.
Distribution lines.
Low voltage rural power lines.
Shunt admittance includes both shunt capacitance and shunt leakage conductance.
Option B is incorrect because power loss (I2R) is the primary factor considered in short line voltage regulation.
Option C is incorrect because series impedance is the defining parameter of a short transmission line.
A is correct тАФ In short transmission line analysis, the line length is small enough that the effect of shunt capacitance is negligible and hence omitted.
For medium transmission lines (80-250 km), use Nominal ╧А or T methods, where shunt admittance is considered as half the capacitance at each end.