Join 60,000+ competitive exam aspirants
Which of the following is the equation used for the best power factor design of a three-phase induction motor?
𝝉=0.81L
𝝉=0.18L
D=0.18L
𝝉=0.18L
𝝉=0.18L
In the design of three-phase induction motors, the relationship between the pole pitch (τ) and the core length (L) is critical for optimizing magnetic flux distribution and minimizing leakage reactance. The empirical formula τ=0.18L is used to achieve the best power factor by balancing the air-gap area and leakage flux paths.
In the design of three-phase induction motors, the relationship between the pole pitch (τ) and the core length (L) is critical for optimizing magnetic flux distribution and minimizing leakage reactance. The empirical formula τ=0.18L is used to achieve the best power factor by balancing the air-gap area and leakage flux paths.
τ=0.18L — Empirical design relation for pole pitch τ (meters) and core length L (meters).
The design of an induction motor involves choosing the number of poles and the length of the rotor to minimize the magnetizing current, which directly impacts the power factor. A shorter pole pitch relative to the core length reduces the leakage reactance per phase, while an excessively long core increases mechanical complexity; the constant 0.18 serves as a design optimization coefficient derived from magnetic circuit analysis.
The pole pitch τ determines the arc length per pole.
Higher power factor in induction motors leads to reduced stator current and lower I2R losses.
The constant 0.18 is an empirical value specifically optimized for standard efficiency industrial motors.
Minimized magnetizing current
Improved efficiency due to reduced leakage flux
Requires careful balancing of mechanical and electrical constraints
Specific to conventional cage induction motor topologies
Industrial motor design
Optimization of high-performance AC machines
This formula is a fundamental guideline in machine design textbooks like A.K. Sawhney.
Option A uses an incorrect coefficient (0.81), and Option C incorrectly identifies D (diameter) instead of τ (pole pitch).
D is correct — The formula τ=0.18L provides the optimum ratio of pole pitch to core length for achieving the best power factor in an induction motor.
Always remember that in machine design, the ratio of pole pitch to core length is the primary lever for controlling the magnetizing current component of the stator current.