Join 60,000+ competitive exam aspirants
Which of the following is true for a two-pole three-phase induction motor design? Take Pi=3.14
D=0.27L
D=0.18L
D=0.1L
D=L
D=0.27L
In the design of a three-phase induction motor, the relationship between the stator bore diameter (D) and the core length (L) is derived from the output equation. For a high-speed, two-pole machine, the ratio DL is typically chosen to minimize material usage and ensure optimal magnetic flux distribution, leading to the empirical relation D=0.27L.
In the design of a three-phase induction motor, the relationship between the stator bore diameter (D) and the core length (L) is derived from the output equation. For a high-speed, two-pole machine, the ratio DL is typically chosen to minimize material usage and ensure optimal magnetic flux distribution, leading to the empirical relation D=0.27L.
Q=C0D2Lns — Output equation of an induction motor
D=0.27L — Empirical design relation for 2-pole machines
The design process utilizes the output coefficient C0, where the output Q=C0D2Lns. For a given number of poles, the ratio of core length L to diameter D is restricted by ventilation requirements and the need to limit leakage reactance. For a 2-pole machine, the diameter is restricted by the peripheral speed limit, leading to a smaller D relative to the length L compared to multi-pole machines.
The 2-pole machine has the highest synchronous speed for a fixed frequency, necessitating a specific D/L ratio.
The constant 0.27 is an empirical factor dependent on specific magnetic and electric loading constraints.
Designers optimize L and D to balance thermal capacity, efficiency, and cost.
Optimizes material usage for high-speed induction motors.
Ensures better cooling efficiency for the stator bore.
Specific to 2-pole design only; not applicable to 4-pole or 6-pole machines.
Does not account for variation in specific magnetic loading (Bav).
Design of industrial squirrel cage induction motors.
Predictive modeling for stator core dimensions in electrical machine design.
Standard constraints for induction motors assume a specific range of L/D ratios based on the pole count to ensure stability and manufacturing feasibility.
Option B, C, and D do not align with standard empirical machine design tables for 2-pole configuration.
A is correct — The empirical design formula for a two-pole three-phase induction motor is D=0.27L.
Always remember that for a 2-pole machine, the diameter D is limited by the peripheral speed (usually ≤75 m/s), which forces the use of a smaller D relative to L compared to lower-speed machines.