Join 60,000+ competitive exam aspirants
Which of the following power plants normally operates at high speed?
Hydro electric
Steam turbine
Petrol engine
Diesel engine
Steam turbine
Steam turbines are high-speed prime movers that operate at typical synchronous speeds of 3000 rpm (at 50 Hz) or 3600 rpm (at 60 Hz). These speeds are necessary to achieve optimal thermodynamic efficiency and power-to-weight ratios in thermal power generation.
Steam turbines are high-speed prime movers that operate at typical synchronous speeds of 3000 rpm (at 50 Hz) or 3600 rpm (at 60 Hz). These speeds are necessary to achieve optimal thermodynamic efficiency and power-to-weight ratios in thermal power generation.
NsтАЛ=P120fтАЛ тАФ Synchronous speed formula where P is the number of poles.
n=601тАЛ├ЧP120fтАЛ тАФ Speed in revolutions per second.
In a steam turbine, high-pressure steam expands through nozzles, converting thermal energy into kinetic energy. This high-velocity steam hits the turbine blades, imparting rotational torque. Because the working fluid is gaseous, the turbine blades can sustain very high rotational speeds compared to hydraulic turbines, which handle denser liquid water.
Steam turbines are almost universally 2-pole or 4-pole machines to maintain high speed.
Hydro turbines are typically multi-pole (low speed) because water flow is slow and heavy.
High rotational speeds reduce the size and cost of the coupled alternator.
The centrifugal force at high speeds imposes limits on the mechanical design of turbine blades.
Compact size due to high power density.
Higher efficiency at large scale capacities.
Smooth rotation with minimal vibration compared to reciprocating engines.
High mechanical stress on rotating components.
Requires high-precision balancing and specialized lubrication systems.
Large scale Thermal power plants.
Nuclear power generation.
Industrial combined heat and power (CHP) systems.
| Feature | Hydro Electric | Steam Turbine |
|---|---|---|
Typical Prime Mover Speed | 100 - 600 rpm | 3000 - 3600 rpm |
Hydroelectric plants usually use Kaplan or Francis turbines with many poles (low speed).
Diesel/Petrol engines are reciprocating engines, generally operating at medium speeds (750 - 1500 rpm) due to piston inertia limits.
Steam turbines utilize the entire steam flow path to generate continuous high-speed torque.
B is correct тАФ Steam turbines are designed to run at synchronous speeds of 3000 rpm (50Hz) or 3600 rpm (60Hz) to maximize thermal efficiency.
Always remember that speed NsтАЛ is inversely proportional to the number of magnetic poles (P). Fewer poles result in higher speeds, which is why steam turbines use 2-pole configurations.