Join 60,000+ competitive exam aspirants
Which of the following statement is/are not correct for automatic DC motor starters.
Start button, Stop Button, Main operating coil & Overload relay contacts are connected in series.
Auxiliary (Maintaining) Contact is always connected in parallel with Start Button.
Overload coil and Main Contact are connected in series.
Main contact and auxiliary contact are operated according to the Main operating coil and auxiliary operating coil simultaneously.
Main contact and auxiliary contact are operated according to the Main operating coil and auxiliary operating coil simultaneously.
In an automatic DC motor starter, both the main power contacts and the auxiliary holding (maintaining) contacts are operated by a single main contactor coil. Statement D is incorrect because there is no separate 'auxiliary operating coil' that operates the auxiliary contact simultaneously.
In an automatic DC motor starter, both the main power contacts and the auxiliary holding (maintaining) contacts are operated by a single main contactor coil. Statement D is incorrect because there is no separate 'auxiliary operating coil' that operates the auxiliary contact simultaneously.
IaтАЛ=RaтАЛVтИТEbтАЛтАЛ тАФ Armature current equation during starting (EbтАЛ=0 at N=0)
TeтАЛ=ktтАЛ╬жIaтАЛ тАФ Electromagnetic torque developed by DC motor
When the Start push button is pressed, the circuit to the main operating coil is completed. The energized main coil mechanically pulls in both the main contacts (which connect the motor to the supply lines) and the auxiliary holding contacts (which provide a parallel path around the Start button). Upon releasing the Start button, the main coil remains energized through its own auxiliary contact until the Stop button or overload relay contacts open the control circuit.
A single main operating electromagnetic coil simultaneously controls both main heavy-duty power contacts and auxiliary control contacts.
The overload relay coil is connected in series with the motor main armature circuit to directly sense line current.
Overload relay contacts are normally closed (NC) and connected in series with the control circuit coil to break power during overload conditions.
The auxiliary maintaining contact is connected in parallel with the Start push button to provide continuous current path after releasing the Start button (latching mechanism).
Provides automatic remote operation and remote push-button control.
Ensures inherent Low-Voltage / No-Volt protection through self-holding contacts.
Eliminates reliance on manual operator speed for resistance cutting during startup.
More complex control wiring compared to simple manual starters.
Higher initial cost due to contactors, relays, and interlocks.
Industrial DC motor drives needing remote push-button station control.
Automated machinery and manufacturing plants requiring sequential starting and safety interlocks.
Statement A is CORRECT: The control circuit consists of the Stop button, Start button (in series with Stop), Main operating coil, and Overload contacts connected in series.
Statement B is CORRECT: The auxiliary contact (maintaining contact) bypasses the Start push-button by being wired in parallel across it.
Statement C is CORRECT: The Overload sensing coil and Main power contacts are wired directly in series with the motor armature line.
Statement D is INCORRECT: There is only ONE main operating coil in standard contactors that mechanically moves both main contacts and auxiliary contacts simultaneously.
D is correct тАФ Main contacts and auxiliary contacts are both actuated mechanically by a single main operating coil, not separate individual operating coils.
Remember: Control elements (Stop, OL NC contacts, Coil) are wired in series for safety, while holding contacts are ALWAYS wired in parallel across the non-latching Start button.