Join 60,000+ competitive exam aspirants
Arrange proper sequence for automatic DC motor starter.
(a) Press Start Button
(b) Main Operating coin energies.
(c) Main and auxiliary contact closed simultaneously.
(d) motor get supply
a - b - c - d
a - d - b - c
d - a - c - b
a - b - d - c
a - b - c - d
An automatic DC motor starter operates through a sequential control circuit designed to protect the armature from high initial currents. Pressing the start button energizes the main operating coil, which subsequently closes the main and auxiliary contacts simultaneously to supply power to the motor and maintain the circuit latch.
IS/IEC 60947-4-1
An automatic DC motor starter operates through a sequential control circuit designed to protect the armature from high initial currents. Pressing the start button energizes the main operating coil, which subsequently closes the main and auxiliary contacts simultaneously to supply power to the motor and maintain the circuit latch.
IaтАЛ=RaтАЛ+RextтАЛVтИТEbтАЛтАЛ тАФ Armature current during starting
EbтАЛ=60A╬жZNPтАЛ тАФ Back EMF proportional to motor speed
When the start push-button is pressed, a low-current control circuit is completed to energize the main contactor coil (operating coil). Upon energization, the coil creates an electromagnetic force that pulls the contactor armature, closing the main power contacts and auxiliary holding contacts simultaneously. This seals in the coil circuit and connects the DC motor armature to the supply through starting resistances, which are later cut out automatically as back EMF EbтАЛ builds up.
At standstill (N=0), back EMF EbтАЛ=0, leading to extremely high starting armature current if directly connected.
Auxiliary contacts act as a holding circuit (seal-in contact) to keep the operating coil energized after releasing the Start button.
Automatic starters utilize relays (time-delay, current-limit, or counter-EMF type) to cut off external resistors automatically as the motor accelerates.
Eliminates human error during motor acceleration.
Provides reliable remote control and automatic overload protection.
More complex circuitry compared to manual starters.
Higher initial cost and maintenance requirement.
Automatic control of DC motors in industrial drives, cranes, and hoists.
Constant-speed applications requiring remote push-button operation.
Option B (a-d-b-c) is incorrect because the motor cannot get supply before the contacts close.
Option C (d-a-c-b) reverses the cause-and-effect relationship of control circuits.
Option D (a-b-d-c) is incorrect because contact closure must logically precede current flowing to the motor.
A is correct тАФ The correct sequence is pressing the start button (a), which energizes the main coil (b), closing the main and auxiliary contacts (c), and finally supplying power to the motor (d).
Remember that in electro-magnetic contactor circuits, control signals always precede main power delivery: Command тЖТ Coil тЖТ Contacts тЖТ Load.