Join 60,000+ competitive exam aspirants
Which of the following type of asphalt is better suited for surface sealing and dust control in flexible pavements?
Cold mix asphalt
Hot mix asphalt
Emulsified asphalt
Cutback asphalt
Emulsified asphalt
Emulsified asphalt is a stable dispersion of bitumen in water, stabilized by an emulsifying agent. It is ideal for surface sealing and dust control because it can be applied at ambient temperatures and has low viscosity, allowing for easy penetration into surface voids.
IS 8887:2018
Emulsified asphalt is a stable dispersion of bitumen in water, stabilized by an emulsifying agent. It is ideal for surface sealing and dust control because it can be applied at ambient temperatures and has low viscosity, allowing for easy penetration into surface voids.
ViscosityтИЭTemperature1тАЛ
Bitumen┬аContent=Total┬аMassтИТWater┬аMass
The bitumen particles are negatively (anionic) or positively (cationic) charged and remain suspended in water. Upon contact with the aggregate or during evaporation, the emulsion 'breaks', causing the water to separate and the bitumen to coalesce, leaving a thin, uniform adhesive film on the surface.
Emulsions do not require heating, making them energy-efficient and safer to handle.
They can be used on damp surfaces, unlike cutbacks or hot mixes which require dry conditions.
They are environmentally friendly as they reduce volatile organic compound (VOC) emissions.
Breaking time can be controlled by the choice of emulsifier (Rapid, Medium, or Slow setting).
Application at ambient temperature
Can be used on wet or damp aggregates
High penetration capability due to low initial viscosity
Environmentally safe (low VOC emission)
Sensitive to freezing temperatures
Requires careful storage to prevent sedimentation
Setting time can be unpredictable under high humidity
Tack coats and prime coats
Surface dressing or seal coats
Dust control for gravel roads
Cold mix patching
Rapid-setting (RS) emulsions are typically used for surface dressing.
Slow-setting (SS) emulsions are generally used for soil stabilization and dust control.
Option D (Cutback asphalt) is less preferred currently due to environmental concerns regarding volatile solvents.
Option B (Hot mix asphalt) is used for structural layers, not surface sealing or dust control.
C is correct тАФ Emulsified asphalt is the preferred choice for surface sealing and dust control due to its ability to be applied at ambient temperatures and its excellent wetting characteristics.
Always remember that 'Cold' application methods like emulsified asphalt are governed by surface area and charge of aggregate, whereas 'Hot' methods are governed by viscosity-temperature relationships.