Join 60,000+ competitive exam aspirants
Width of a carbon brush should be equal to
less than the width of the commutator segment
the width of the 1 to 2 commutator segment
the width of the 2 to 3 commutator segment
the width more than 3 commutator segment
the width of the 2 to 3 commutator segment
The width of a carbon brush is standardized to cover a contact area equivalent to 2 to 3 commutator segments. This sizing ensures continuous electrical contact and smooth commutation as the brush slides across the rotating commutator.
The width of a carbon brush is standardized to cover a contact area equivalent to 2 to 3 commutator segments. This sizing ensures continuous electrical contact and smooth commutation as the brush slides across the rotating commutator.
TcтАЛ=vWbтАЛтИТWmтАЛтАЛ тАФ Commutation time, where WbтАЛ is brush width, WmтАЛ is mica width, and v is peripheral velocity
The brush width determines the duration of the short-circuit period during commutation, known as the 'commutation period' (TcтАЛ). By spanning 2 to 3 segments, the brush facilitates a gradual reversal of current in the armature coils undergoing commutation, which helps in suppressing sparking by providing a path for current change via the brush-commutator contact resistance.
Ensures that the coil undergoing commutation is short-circuited for the duration of TcтАЛ.
Helps in achieving 'linear commutation' by adjusting the contact resistance.
A width less than 2 segments can cause open-circuit conditions during brush transition.
Excessive width increases circulating currents in the short-circuited coils.
Reduces sparking at the brush-commutator interface.
Provides stable mechanical support for the brush holder.
Ensures continuous current collection.
If too wide, it shorts too many segments, causing excessive circulating currents.
Increased width leads to higher brush friction losses.
DC Generators
DC Motors
Universal Motors
The choice of 2 to 3 segments is a design compromise between minimizing sparking and preventing excessive circulating currents.
Option B is typically too narrow, risking current interruption, while Option D would lead to severe short-circuiting of multiple coils, causing heating.
C is correct тАФ The width of a carbon brush is designed to be equal to the width of 2 to 3 commutator segments to ensure optimal commutation and continuous current flow.
Always remember that the commutation period is directly proportional to brush width; if the brush is too thin, the rapid change in current (di/dt) leads to high induced EMF and sparking.