Join 60,000+ competitive exam aspirants
With the increase in pressure ratio thermal efficiency of a simple gas turbine power plant with fixed turbine inlet temperature
Increases
Reduces
First increases and then falls
First falls and then increases
First increases and then falls
In a simple gas turbine (Brayton cycle), thermal efficiency depends on the pressure ratio. As the pressure ratio increases, the cycle efficiency initially increases; however, beyond a certain optimal pressure ratio, the increase in compressor work requirement offsets the turbine gains, leading to a decline in net thermal efficiency.
In a simple gas turbine (Brayton cycle), thermal efficiency depends on the pressure ratio. As the pressure ratio increases, the cycle efficiency initially increases; however, beyond a certain optimal pressure ratio, the increase in compressor work requirement offsets the turbine gains, leading to a decline in net thermal efficiency.
╬╖thтАЛ=1тИТrp(╬│тИТ1)/╬│тАЛ1тАЛ тАФ Ideal Brayton cycle efficiency
rpтАЛ=P1тАЛP2тАЛтАЛ тАФ Pressure ratio of the compressor
The thermal efficiency of an ideal Brayton cycle is given by ╬╖=1тИТ(rpтАЛ)(╬│тИТ1)/╬│1тАЛ. While this suggests efficiency monotonically increases with the pressure ratio rpтАЛ, real gas turbine cycles account for component efficiencies and fixed inlet temperatures. At very high pressure ratios, the compressor outlet temperature approaches the turbine inlet temperature, reducing the heat addition range and ultimately decreasing the work output and overall efficiency.
The Brayton cycle is the theoretical basis for gas turbines.
Maximum efficiency occurs at a specific pressure ratio determined by the turbine inlet temperature (TmaxтАЛ).
Increasing rpтАЛ decreases the heat supplied (QinтАЛ=cpтАЛ(TmaxтАЛтИТTcomp,outтАЛ)).
High power-to-weight ratio
Quick start-up time
Lower thermal efficiency compared to combined cycle plants
Sensitivity to ambient air temperature
Aircraft jet engines
Peak load power generation
At high pressure ratios, the compressor work WcтАЛ=cpтАЛ(T2тАЛтИТT1тАЛ) rises rapidly, which reduces the Net Work output (WnetтАЛ=WtтАЛтИТWcтАЛ).
Option D is conceptually incorrect as efficiency never falls initially under standard gas turbine design parameters.
C is correct тАФ The thermal efficiency of a gas turbine increases with the pressure ratio up to an optimal point, after which internal losses and compressor requirements cause it to decrease.
Always remember that for any heat engine cycle involving compression, there is a 'sweet spot' for the pressure ratio where the trade-off between heat input and compressor work is optimized.