Join 60,000+ competitive exam aspirants
The thermal efficiency of a gas turbine cycle with ideal regenerative heat exchange is
Less than work ratio
More than work ratio
Equal to work ratio
Unpredictable
Equal to work ratio
In an ideal gas turbine cycle with perfect regeneration (effectiveness ╧╡=1), the thermal efficiency equals the work ratio. The work ratio is defined as the net work output divided by the turbine work output.
In an ideal gas turbine cycle with perfect regeneration (effectiveness ╧╡=1), the thermal efficiency equals the work ratio. The work ratio is defined as the net work output divided by the turbine work output.
╬╖thтАЛ=1тИТT3тАЛT1тАЛтАЛ тАФ Ideal thermal efficiency of regenerative Brayton cycle
rwтАЛ=WtтАЛWnetтАЛтАЛ тАФ Work ratio definition
In a Brayton cycle, regeneration recovers heat from the turbine exhaust to preheat compressed air before the combustion chamber. When regeneration is ideal, the temperature of air leaving the regenerator equals the turbine exhaust temperature, essentially eliminating the heat rejected during the cycle in the external sense. This results in the thermal efficiency ╬╖thтАЛ=1тИТT3тАЛT1тАЛтАЛ (where T1тАЛ is compressor inlet and T3тАЛ is turbine inlet), which mathematically converges to the work ratio (rwтАЛ=WtтАЛWnetтАЛтАЛ) under ideal assumptions.
Ideal regeneration assumes an effectiveness of 100%.
It significantly increases efficiency by reducing fuel consumption.
The work ratio decreases as the pressure ratio increases in a gas turbine cycle.
Real regenerators have effectiveness values between 0.6 and 0.8.
Improved fuel economy
Reduced heat rejection requirements
Increased size and weight due to heat exchanger
Pressure drop across the regenerator matrix
Combined cycle power plants
Marine propulsion turbines
This relation holds strictly true only for the ideal case of constant specific heats and perfect heat transfer.
Work ratio is a critical parameter for gas turbines, indicating the sensitivity of net power to component efficiencies.
C is correct тАФ The thermal efficiency of an ideal gas turbine cycle with perfect regeneration is equal to the work ratio.
Always remember that regeneration benefits are maximized at low pressure ratios in gas turbine cycles.