Join 60,000+ competitive exam aspirants
A direct runoff hydrograph of triangular shape, caused by a storm, has a time base of 100 hours and the peak flow of 50 cumec occurring at 30 hours from the start. If the catchment area is 150 km┬▓, the rainfall excess of the storm was _____________.
6 cm
5.6 cm
6.8 cm
7.2 cm
6 cm
The rainfall excess is calculated by determining the total volume of direct runoff under the triangular hydrograph and dividing it by the catchment area. For a triangular hydrograph, the volume V is equivalent to the area of the triangle formed by the time base TbтАЛ and the peak discharge QpтАЛ.
The rainfall excess is calculated by determining the total volume of direct runoff under the triangular hydrograph and dividing it by the catchment area. For a triangular hydrograph, the volume V is equivalent to the area of the triangle formed by the time base TbтАЛ and the peak discharge QpтАЛ.
V=21тАЛ├ЧTbтАЛ├ЧQpтАЛ тАФ Volume of runoff where TbтАЛ=100┬аh and QpтАЛ=50┬аm3/s
d=AVтАЛ тАФ Rainfall excess depth where V is in m3 and A is in m2
The total volume of direct runoff V is represented by the area under the hydrograph curve: V=21тАЛ├ЧTime┬аBase├ЧPeak┬аFlow. Since V also equals the product of depth of rainfall excess d and catchment area A, we solve for d=AVтАЛ.
Convert time base from hours to seconds: 100┬аh=360,000┬аs.
Convert catchment area from km2 to m2: 150├Ч106┬аm2.
Total Volume V=21тАЛ├Ч360,000├Ч50=9,000,000┬аm3.
Rainfall Excess d=150,000,0009,000,000тАЛ=0.06┬аm=6┬аcm.
Simple geometric representation
Quick estimation for ungauged catchments
Oversimplification of complex storm patterns
Assumes constant base flow and linear response
Unit hydrograph theory development
Flood routing analysis
The peak time of 30 hours is extraneous information for the total volume calculation of a simple triangular hydrograph.
Option B, C, and D are incorrect results obtained from miscalculating unit conversions between cubic meters and hectares or square kilometers.
A is correct тАФ The total volume of runoff is 9,000,000┬аm3, which corresponds to a depth of 6┬аcm over a 150┬аkm2 catchment.
Always ensure units are consistent; convert time to seconds and area to square meters before calculating runoff depth in meters.