Join 60,000+ competitive exam aspirants
A high steep camber is NOT desirable to:
prevent entry of water into bituminous pavement layers
remove rain water from pavement surface
transverse tilt and skid of vehicle
prevent the entry of surface water into subgrade soil
transverse tilt and skid of vehicle
Camber, or cross-slope, is provided to drain surface water from the road. While essential for drainage, a high steep camber causes the vehicle to tilt transversely, which reduces the vehicle's stability and increases the risk of skidding, especially on curves.
IRC:73-1980
Camber, or cross-slope, is provided to drain surface water from the road. While essential for drainage, a high steep camber causes the vehicle to tilt transversely, which reduces the vehicle's stability and increases the risk of skidding, especially on curves.
n=N1тАЛ тАФ where n is the camber and N is the ratio of horizontal to vertical projection
Camber is provided as a convex slope. Water flows laterally towards the shoulders due to gravity. If the slope is too steep, the center of gravity of the vehicle shifts, causing the load on the inner wheels to change significantly compared to the outer wheels, which promotes lateral sliding or skidding.
Camber helps in quick drainage of surface water.
Excessive camber causes uneven wear of tires.
Steep camber creates a feeling of discomfort and insecurity for drivers.
The required camber depends on rainfall intensity and pavement surface type.
Efficient water removal
Protection of structural integrity of pavement
Increased risk of skidding at high slopes
Uneven tyre wear
Tendency for vehicles to move away from the center
Bituminous roads
Concrete pavements
Water-bound macadam roads
The range of camber for thin bituminous surface is typically 1.7% to 2.0%.
Option A, B, and D are primary objectives of providing camber; thus they are desirable functions.
C is correct тАФ high steep camber is not desirable as it leads to transverse tilting and the risk of vehicle skidding.
Remember that camber serves the dual purpose of drainage and safety; always prioritize moderate values to ensure both water runoff and vehicle stability.