Join 60,000+ competitive exam aspirants
A Moody diagram represents ______ as a function of Reynolds number, in a pipe flow.
Length of pipe
Kinetic head
Flow velocity
friction factor
friction factor
The Moody diagram is a graphical representation of the Darcy-Weisbach friction factor, denoted as f, as a function of the Reynolds number (Re) and the relative pipe roughness (D╧╡тАЛ). It is used to determine the head loss due to friction in fully developed pipe flow.
The Moody diagram is a graphical representation of the Darcy-Weisbach friction factor, denoted as f, as a function of the Reynolds number (Re) and the relative pipe roughness (D╧╡тАЛ). It is used to determine the head loss due to friction in fully developed pipe flow.
f=Re64тАЛ тАФ friction factor for laminar flow
fтАЛ1тАЛ=тИТ2log10тАЛ(3.7╧╡/DтАЛ+RefтАЛ2.51тАЛ) тАФ Colebrook-White equation for turbulent flow
The diagram maps the transition from laminar flow to turbulent flow. For laminar flow (Re<2000), f is a linear function of Re independent of roughness. In the turbulent regime, f depends on both Re and the relative roughness, converging to a constant value at very high Reynolds numbers, representing the fully rough flow regime.
The ordinate (y-axis) represents the Darcy friction factor (f).
The abscissa (x-axis) represents the Reynolds number (Re) on a logarithmic scale.
Curves on the plot correspond to different values of relative roughness D╧╡тАЛ.
It is valid for both laminar and turbulent pipe flow conditions.
Provides a direct visual method to estimate friction loss without iterative calculations.
Valid for a wide range of flow conditions and pipe materials.
Reading values from the chart can introduce human error due to the logarithmic scale.
The Colebrook-White equation is implicit, making the chart a convenient graphical alternative for manual calculation.
Pipeline design for water supply systems.
Analysis of industrial piping networks for chemical processing.
The friction factor f used in the Moody diagram is the Darcy friction factor; sometimes the Fanning friction factor is used, which is 1/4 of the Darcy value.
Option A is incorrect because length is a geometric parameter, not a function of Re. Option B is incorrect as kinetic head relates to velocity head 2gv2тАЛ. Option C is incorrect as velocity is part of the Reynolds number calculation.
D is correct тАФ The Moody diagram is a plot of the friction factor versus the Reynolds number for various relative roughness values.
Always remember that the Moody diagram applies specifically to the Darcy-Weisbach friction factor; check if the question implies Fanning friction factor, which requires dividing by 4.