Join 60,000+ competitive exam aspirants
A synchronous machine has higher capacity for
Leading power factor
Lagging power factor
It does not depend upon the power factor of the machine
It depends upon the power factor of the load
Leading power factor
A synchronous machine, particularly when over-excited, exhibits a higher capability to handle loads at a leading power factor because the machine generates reactive power to support the system voltage. At leading power factors, the armature reaction is magnetizing in nature, which assists the field excitation in maintaining the magnetic flux, effectively allowing for higher capacity limits compared to lagging power factor operation where the armature reaction is demagnetizing.
A synchronous machine, particularly when over-excited, exhibits a higher capability to handle loads at a leading power factor because the machine generates reactive power to support the system voltage. At leading power factors, the armature reaction is magnetizing in nature, which assists the field excitation in maintaining the magnetic flux, effectively allowing for higher capacity limits compared to lagging power factor operation where the armature reaction is demagnetizing.
P=XsтАЛEfтАЛVтАЛsin(╬┤) тАФ Represents the power-angle characteristic where capacity is directly influenced by excitation voltage EfтАЛ
EfтАЛтАЛ=V+IaтАЛтАЛ(RaтАЛ+jXsтАЛ) тАФ The phasor voltage balance equation determining excitation requirements
The internal voltage equation of a synchronous generator is given by EfтАЛтАЛ=V+IaтАЛтАЛ(RaтАЛ+jXsтАЛ). When operating at a leading power factor, the armature current IaтАЛтАЛ leads the terminal voltage V. This configuration causes the armature reaction flux to add to the main field flux (magnetizing effect). Consequently, for a given armature current, the machine can maintain better stability and higher output capacity due to this internal reinforcement of the magnetic field.
Over-excited synchronous machines act as a source of reactive power (leading PF).
Leading PF operation provides a magnetizing armature reaction, enhancing magnetic flux.
Synchronous condensers are specifically designed for leading PF operation to provide voltage support.
Demagnetizing effect at lagging PF limits the load capacity due to heating and stability constraints.
Improved system voltage profile through reactive power injection.
Higher stability margin compared to lagging power factor operation.
Requires complex field excitation control circuitry.
Higher cost compared to static capacitor banks for small-scale applications.
Synchronous condensers for voltage regulation in long transmission lines.
Industrial power factor correction in large plants.
The capacity of a synchronous machine is physically limited by thermal limits (armature heating) and stability limits (steady-state power limit).
Option B (Lagging PF) causes a demagnetizing effect, requiring higher field current to maintain the same terminal voltage, which hits field heating limits earlier.
A is correct тАФ A synchronous machine has higher capacity at leading power factor due to the magnetizing effect of the armature reaction aiding the main field flux.
Always remember the mnemonic: Over-excited = Leading = Magnetizing = Reactive Power Generator.