Join 60,000+ competitive exam aspirants
A transmission line of 80 km length is operating at 400 Hz, it can be classified as
Short length line
Medium length line
Long length line
All of the above
Long length line
A transmission line's classification depends on the electrical length, defined by the product of the length l and the phase constant ╬▓. While 80 km is typically a medium line at 50/60 Hz, the classification shifts to 'long line' at higher frequencies because the propagation constant ╬│=╬▒+j╬▓ is frequency-dependent.
A transmission line's classification depends on the electrical length, defined by the product of the length l and the phase constant ╬▓. While 80 km is typically a medium line at 50/60 Hz, the classification shifts to 'long line' at higher frequencies because the propagation constant ╬│=╬▒+j╬▓ is frequency-dependent.
╬▓=╬╗2╧АтАЛ тАФ relationship between phase constant and wavelength
╬╗=fvтАЛ тАФ dependence of wavelength on frequency
The electrical length is determined by the ratio of the line length to the wavelength ╬╗. Since ╬╗=fvтАЛ, where v is the velocity of propagation and f is frequency, increasing f reduces ╬╗. As the frequency increases to 400 Hz, the line length of 80 km becomes a significant fraction of the wavelength, causing distributed parameter effects to dominate, thus categorizing it as a long line.
Short lines: Length < 80 km and operating voltage < 20 kV (low frequency)
Medium lines: 80 km < Length < 160-200 km (at power frequency)
Long lines: Length > 200 km or high frequency operation where distributed parameters are mandatory
At 400 Hz, the wavelength ╬╗ decreases, making a 80 km line electrically equivalent to a much longer line at 50 Hz.
Accurate modeling using ABCD parameters for long lines
Accounts for capacitive shunt admittance and series impedance distribution
Complexity in calculation compared to lumped parameter models
Increased susceptibility to resonance and standing waves at high frequencies
Aviation power systems (typically 400 Hz)
High-speed rail electrification
Long-distance power transmission modeling
Standard power frequency lines (50 Hz) of 80 km are categorized as medium lines, but frequency is a primary factor in electrical length classification.
Option A and B are incorrect as the elevated frequency (400 Hz) shortens the effective wavelength, shifting the line into the 'Long' category.
C is correct тАФ Due to the high operating frequency of 400 Hz, the electrical length of the 80 km line becomes significant relative to the wavelength, classifying it as a long transmission line.
Always check the frequency in transmission line problems; frequency inversely affects wavelength, meaning high-frequency lines are almost always treated as long lines regardless of physical length.