Join 60,000+ competitive exam aspirants
Any leakage of air into the condenser destroys the vacuum and causes
An increase in air pressure in the condenser limiting the useful heat drop in the steam turbine
Lowering of the partial pressure of the steam and of the saturation temperature along with it
Under cooling of the condensate more severe
All of above
All of above
Air leakage into a steam condenser increases the total pressure within the shell by adding a non-condensable partial pressure component, which disrupts the vacuum. This rise in condenser pressure reduces the heat drop available for work in the steam turbine, directly decreasing the overall thermal efficiency of the power plant.
Air leakage into a steam condenser increases the total pressure within the shell by adding a non-condensable partial pressure component, which disrupts the vacuum. This rise in condenser pressure reduces the heat drop available for work in the steam turbine, directly decreasing the overall thermal efficiency of the power plant.
PcondтАЛ=PsteamтАЛ+PairтАЛ тАФ Dalton's law of partial pressures in a condenser
╬╖thermalтАЛ=1тИТTsupplyтАЛTrejectтАЛтАЛ тАФ Effect of increased rejection temperature on efficiency
According to Dalton's law of partial pressures, PtotalтАЛ=PsteamтАЛ+PairтАЛ. When air leaks in, the total pressure (PtotalтАЛ) rises. For a fixed cooling water temperature, the saturation temperature of the steam (TsтАЛ) corresponds to the partial pressure of steam (PsтАЛ=PtotalтАЛтИТPairтАЛ). Because the partial pressure of steam drops, the condensation temperature decreases, leading to lower heat rejection efficiency and increased sub-cooling of the condensate.
Air is non-condensable and accumulates in the condenser, acting as an insulator on heat transfer surfaces.
Higher condenser pressure means the steam must expand to a higher pressure at the turbine exhaust, reducing enthalpy drop.
Sub-cooling occurs when the condensate temperature falls below the saturation temperature of the steam entering the condenser.
Efficient vacuum maintenance is critical for minimizing fuel consumption in thermal power plants.
Thermal Power Plant Operation
Steam Condenser Maintenance
Turbine Performance Monitoring
Condenser vacuum is typically maintained by air ejectors or vacuum pumps to continuously remove incoming non-condensable gases.
Option B is technically correct as the presence of air reduces the mole fraction of steam, thereby lowering the partial pressure of the vapor phase.
D is correct тАФ Air leakage causes a rise in absolute pressure, reduces the available enthalpy drop for the turbine, and induces non-ideal thermodynamic behavior like sub-cooling.
Always remember that in steam cycles, the vacuum is a measure of the ability to extract maximum work; any air ingress is an energy loss factor.