Join 60,000+ competitive exam aspirants
The steam is super-heated to the highest economical temperature in order to
Reduce the requirement of steam for a given output of energy owing to its high internal energy and thus reduce the turbine size
Reduce the mechanical resistance to the flow of steam over turbine blades and increases the efficiency as super-heated steam is dry and so turbine blades remain dry
Avoid corrosion and pitting at the turbine blades occurring owing to steam dryness
All of above
All of above
Superheating steam in a Rankine cycle increases the mean temperature of heat addition, which directly enhances the thermal efficiency of the plant. Furthermore, it ensures that the steam remains in the vapor phase throughout the expansion process in the turbine, preventing moisture-induced damage.
Superheating steam in a Rankine cycle increases the mean temperature of heat addition, which directly enhances the thermal efficiency of the plant. Furthermore, it ensures that the steam remains in the vapor phase throughout the expansion process in the turbine, preventing moisture-induced damage.
╬╖thтАЛ=1тИТTsupplyтАЛTrejectтАЛтАЛ тАФ Thermal efficiency of an ideal cycle
QinтАЛ=hsuperheatтАЛтИТhfeedwaterтАЛ тАФ Heat input required
As steam expands through a turbine, its entropy remains constant (isentropic expansion). Without superheating, the expansion line crosses the saturation dome into the two-phase region, creating water droplets. These droplets cause erosion (pitting) of blades and increase mechanical friction losses. Superheating pushes the initial state far enough to the right on the T-s diagram so that the final state at the turbine exhaust has a higher quality (dryness fraction).
Increases the average temperature of heat addition, raising Carnot efficiency.
Prevents blade erosion caused by liquid water droplets impacting turbine blades at high velocities.
Reduces the mass flow rate requirement for the same power output due to higher enthalpy.
Maintains dryness fraction (x) above 0.88-0.90 at turbine exit to protect components.
Higher thermal efficiency
Increased turbine life due to reduced moisture erosion
Improved work output per kg of steam
Requires high-grade heat-resistant alloys for superheater tubes
Increases initial capital cost of the boiler plant
Large scale Thermal Power Plants (TPS)
Combined Cycle Power Plants
The 'highest economical temperature' is constrained by the metallurgical limits of the superheater tubes and turbine blade materials.
Option B refers to the reduction of 'windage' or friction losses caused by wet steam density.
D is correct тАФ Superheating improves thermodynamic efficiency, protects mechanical components from corrosion/erosion, and enhances the overall energy density of the steam.
Always remember that in steam cycles, superheating is the primary method to boost efficiency, while reheating is used specifically to maintain high dryness at the low-pressure turbine stages.