Join 60,000+ competitive exam aspirants
The effect of considering friction in steam nozzles for the same pressure ratio leads to
Increase in dryness fraction of exit steam
Decrease in exit velocity from the nozzle
No change in exit velocity from the nozzle and quality of exit steam
Both (a) and (b)
Increase in dryness fraction of exit steam
Friction in a steam nozzle converts a portion of kinetic energy back into heat (internal energy) due to fluid viscosity and wall interaction. This irreversible process increases the entropy of the steam, resulting in a lower exit velocity and a higher dryness fraction compared to an ideal isentropic expansion.
Friction in a steam nozzle converts a portion of kinetic energy back into heat (internal energy) due to fluid viscosity and wall interaction. This irreversible process increases the entropy of the steam, resulting in a lower exit velocity and a higher dryness fraction compared to an ideal isentropic expansion.
V2тАЛ=2000(h1тАЛтИТh2sтАЛ)тЛЕ╬╖nтАЛтАЛ тАФ where ╬╖nтАЛ is the nozzle efficiency considering friction.
╬Фs=s2aтАЛтИТs2sтАЛ>0 тАФ entropy change due to irreversibility.
In an ideal nozzle, expansion is isentropic (s1тАЛ=s2тАЛ). When friction is considered, the process becomes irreversible and polytropic, causing the exit state to shift to the right on an h-s diagram. The heat generated by friction increases the enthalpy at the exit, leading to an increase in quality (dryness fraction) x2тАЛ and a reduction in the available enthalpy drop (╬Фh), which directly decreases the exit velocity V2тАЛ=2000(h1тАЛтИТh2тАЛ)тАЛ.
Nozzle friction is caused by viscous drag at the walls and internal turbulence.
The process is adiabatic but irreversible, meaning entropy increases.
Friction reduces the kinetic energy gain, directly reducing the discharge velocity.
The enthalpy at exit is higher than isentropic expansion, resulting in 'reheating' of the steam.
Steam Turbines
Jet Propulsion Nozzles
In an isentropic process, the expansion path is vertical on an h-s diagram; friction makes the path slope towards higher entropy.
Option A is correct because the heat added by friction allows some liquid water to evaporate.
Option B is correct because enthalpy drop (which provides kinetic energy) is reduced.
D is correct тАФ Friction causes an irreversible increase in entropy, which reduces the kinetic energy (exit velocity) and increases the final enthalpy (dryness fraction) of the steam.
Always remember that in all real steady-flow turbine or nozzle processes, friction is an entropy-producing process that shifts the final state to the right on an h-s diagram.