Join 60,000+ competitive exam aspirants
The ratio of exit pressure to inlet pressure of maximum mass flow rate per unit area of steam through a nozzle, when the steam is initially dry saturated is
532
545
578
650
578
For steam flowing through a convergent nozzle, the maximum mass flow rate occurs when the flow at the exit is sonic (choked flow). For initially dry saturated steam, the critical pressure ratio is approximately 0.578.
For steam flowing through a convergent nozzle, the maximum mass flow rate occurs when the flow at the exit is sonic (choked flow). For initially dry saturated steam, the critical pressure ratio is approximately 0.578.
P1тАЛP2тАЛтАЛ=(n+12тАЛ)nтИТ1nтАЛ тАФ General formula for critical pressure ratio
nтЙИ1.135 тАФ Polytropic index for dry saturated steam
As the back pressure decreases, the mass flow rate through a nozzle increases until it reaches a critical limit. At this limit, the velocity of the steam at the throat reaches the local speed of sound. For dry saturated steam undergoing isentropic expansion, the ratio of critical pressure (P2тАЛ) to inlet pressure (P1тАЛ) is derived as P1тАЛP2тАЛтАЛ=(n+12тАЛ)nтИТ1nтАЛ, where n is the polytropic index. Substituting n=1.135 for dry saturated steam yields the ratio 0.578.
The phenomenon is known as 'Choked Flow'.
Once the flow is choked, further decrease in back pressure does not increase mass flow rate.
The index n varies depending on the steam quality; 1.135 is the standard value for dry saturated steam.
Ensures predictable mass flow regulation.
Critical for designing steam turbine nozzles.
Limits maximum throughput of the nozzle.
Requires careful pressure control to avoid flow instability.
Steam Turbines
Jet engines and propulsion nozzles
Flow metering devices
For superheated steam, the ratio is approximately 0.546 (where n = 1.3).
The option value 578 represents 0.578 expressed as a decimal ratio scaled by 1000.
C is correct тАФ The critical pressure ratio for dry saturated steam is approximately 0.578, beyond which the mass flow rate becomes choked.
Always remember that the critical pressure ratio depends on the index 'n', which differs between superheated steam (n=1.3), dry saturated steam (n=1.135), and wet steam (n=1.035).