Join 60,000+ competitive exam aspirants
Arrange the following in the correct sequence in which the flue gases passes through them after coming out of the boiler in a thermal power station
ID Fan
Air preheater
Economizer
Electrostatic precipitator
4, 3, 2, 1
3, 2, 4, 1
2, 1, 4, 3
1, 4, 3, 2
3, 2, 4, 1
The flue gases from a thermal power plant boiler must lose their heat content effectively before being discharged into the atmosphere. The sequence is defined by the need to recover waste heat (Economizer, Air Preheater) and remove particulate matter (ESP) before the Induced Draft (ID) fan extracts the cleaned gas to the chimney.
The flue gases from a thermal power plant boiler must lose their heat content effectively before being discharged into the atmosphere. The sequence is defined by the need to recover waste heat (Economizer, Air Preheater) and remove particulate matter (ESP) before the Induced Draft (ID) fan extracts the cleaned gas to the chimney.
╬╖boilerтАЛ=Heat┬аsupplied┬аby┬аfuelHeat┬аabsorbed┬аby┬аsteamтАЛ
╬ФQ=mcpтАЛ╬ФT тАФ Heat transfer relation in the economizer and air preheater
1. Economizer: Extracts heat from flue gases to preheat boiler feedwater. 2. Air Preheater: Further cools the gases by transferring heat to the incoming combustion air. 3. ESP: Uses electrostatic charges to capture fly ash from the cooled gases. 4. ID Fan: Maintains negative pressure in the furnace and discharges gas into the stack.
Economizer is placed first to maximize heat transfer from the high-temperature flue gases.
Air Preheater follows the economizer to extract remaining low-grade heat.
ESP requires cooler gas temperatures for higher collection efficiency.
ID fan is placed at the end to handle the suction of cleaned gases.
Increases overall thermal efficiency of the plant.
Reduces environmental pollution by removing ash before stack discharge.
Increased maintenance due to ash accumulation and corrosion.
Additional power consumption by the ID fan system.
Coal-fired thermal power plants
Industrial steam generators
Placement of the ID fan after the ESP protects the fan blades from erosion caused by fly ash.
Economizer and Air Preheater are heat recovery devices designed to reduce the exit gas temperature.
B is correct тАФ The correct sequence of flue gas flow is Economizer тЖТ Air Preheater тЖТ Electrostatic Precipitator тЖТ ID Fan.
Always remember: Heat recovery equipment precedes cleaning equipment in flue gas paths to utilize maximum thermal gradient.