Join 60,000+ competitive exam aspirants
Bundled conductors are used to
Reduce inductance of the line
Reduce both inductance and capacitance
Reduce corona loss
Reduce corona loss and line inductance
Reduce corona loss and line inductance
Bundled conductors, consisting of two or more conductors per phase, are employed in EHV transmission lines to increase the effective radius of the conductor. This configuration effectively reduces the geometric mean radius (GMR) which lowers line inductance and increases the surface area to mitigate corona discharge.
Bundled conductors, consisting of two or more conductors per phase, are employed in EHV transmission lines to increase the effective radius of the conductor. This configuration effectively reduces the geometric mean radius (GMR) which lowers line inductance and increases the surface area to mitigate corona discharge.
L=2├Ч10тИТ7ln(GMRGMDтАЛ) тАФ Inductance per unit length of transmission line
GMRbundleтАЛ=(nтЛЕrтЛЕdnтИТ1)1/n тАФ Geometric Mean Radius for n-conductors per phase
Increasing the effective conductor radius ReffтАЛ=nncdotrcdotdnтИТ1тАЛ (where n is the number of sub-conductors, r is the individual radius, and d is the bundle spacing) decreases the inductance by increasing the GMR. Furthermore, the increased surface area reduces the voltage gradient at the conductor surface, keeping it below the critical disruptive voltage, thereby significantly reducing corona loss and radio interference.
Bundling increases the effective radius of the conductor group.
Higher GMR leads to lower line inductance.
Lower voltage gradient on the surface prevents air ionization, reducing corona loss.
Commonly used for voltages above 220 kV.
Reduced line inductance
Reduced corona loss and radio interference
Increased power transmission capacity (higher SIL)
Lower surge impedance
Increased wind and ice loading on towers
Higher initial cost due to more conductor material and complex hardware
Increased sag due to higher weight
EHV (Extra High Voltage) Transmission Lines
UHV (Ultra High Voltage) Transmission Lines
Option B is partially correct regarding inductance but incomplete because it ignores corona loss reduction, which is a primary reason for bundling.
Option A is a partial benefit but does not capture the full advantage of bundling.
Surge Impedance ZcтАЛ=CLтАЛтАЛ decreases with bundling because L decreases and C increases.
D is correct тАФ Bundling conductors increases the GMR which reduces line inductance and increases surface area to minimize corona discharge.
Always remember that bundling increases capacitance and decreases inductance; this combination significantly lowers the Surge Impedance (ZcтАЛ=L/CтАЛ), which increases the Surge Impedance Loading (SIL) of the line.