Join 60,000+ competitive exam aspirants
Estimate the flow cross sectional area in a triangular channel with 5 m depth, and side slope 2H:1V.
80 m┬▓
50 m┬▓
40 m┬▓
60 m┬▓
50 m┬▓
The cross-sectional area of a triangular channel is calculated by the geometry of the triangle formed by the water surface and the channel sides. Given the depth y=5┬аm and side slope z=2 (where z is the horizontal component of a z:1 slope), the total top width is T=2zy and the area is A=zy2.
IS 2911 or relevant Irrigation Engineering standards for canal design.
The cross-sectional area of a triangular channel is calculated by the geometry of the triangle formed by the water surface and the channel sides. Given the depth y=5┬аm and side slope z=2 (where z is the horizontal component of a z:1 slope), the total top width is T=2zy and the area is A=zy2.
A=zy2 тАФ Area of a triangular channel
T=2zy тАФ Top width of a triangular channel
In a triangular channel, the side slope z represents the horizontal distance for every unit of vertical depth. By splitting the channel into two right-angled triangles, the total area is A=2├Ч(21тАЛ├Чbase├Чheight). Since base =zy and height =y, the formula simplifies to A=zy2.
Side slope is defined as z horizontal to 1 vertical.
For z=2 and y=5┬аm, the area is 2├Ч52=50┬аm2.
Triangular sections are often used for small channels or natural gullies.
Easy to construct for small flows
Hydraulically efficient at low depths
High velocity at larger depths can cause erosion
Limited capacity compared to trapezoidal sections
Small irrigation ditches
Drainage systems in hilly terrain
The calculation A=2├Ч(5)2=50┬аm2 confirms option B.
Common errors include using the formula for trapezoidal channels (A=(b+zy)y) or misinterpreting the side slope ratio.
B is correct тАФ Using the formula A=zy2 with z=2 and y=5┬аm yields 50┬аm2.
Always verify if the slope is given as z:1 (H:V) or 1:z (V:H); in hydraulic engineering, z usually denotes the horizontal component for a unit vertical depth.