Join 60,000+ competitive exam aspirants
Field weakening method is also called as _________?
constant torque control
constant power control
constant voltage control
constant current control
constant power control
The field weakening method for speed control of a DC motor is known as constant power control because it operates the motor at speeds above its rated value by reducing the magnetic flux (╬ж).Since the motor is operating at rated voltage, and power output is approximately proportional to the product of speed and torque, reducing flux to increase speed while maintaining rated current results in constant power output.
The field weakening method for speed control of a DC motor is known as constant power control because it operates the motor at speeds above its rated value by reducing the magnetic flux (╬ж).Since the motor is operating at rated voltage, and power output is approximately proportional to the product of speed and torque, reducing flux to increase speed while maintaining rated current results in constant power output.
NтИЭ╬ж1тАЛ тАФ Speed is inversely proportional to flux
P=T├Ч╧Й тАФ Power relationship where P remains constant as T decreases and ╧Й increases
In a DC motor, speed is given by N=KbтАЛ╬жVтИТIaтАЛRaтАЛтАЛ. By reducing the field current (IfтАЛ), the flux per pole (╬ж) decreases, which causes the motor speed (N) to increase. Because the back EMF (EbтАЛ=KbтАЛ╬ж╧Й) is kept nearly equal to the terminal voltage (V), and the input power P=VIaтАЛ remains constant (assuming constant V and constant IaтАЛ), the motor exhibits constant power characteristics in the field weakening region.
Used for speed control above the rated speed (base speed).
Field current is reduced to decrease the magnetic flux.
The armature current (IaтАЛ) is maintained at its rated value to prevent overheating.
Since flux is reduced, torque (T=KtтАЛ╬жIaтАЛ) decreases proportionally.
High efficiency as no external resistance is used in the armature circuit.
Allows operation of the motor above base speed.
Torque decreases as speed increases, limiting the load handling capacity at high speeds.
Potential for armature reaction and commutation issues due to weak field.
Electric traction systems.
High-speed machine tool drives.
Paper and textile mills requiring variable speed control.
Constant torque control is typically achieved by armature voltage control below base speed.
Constant voltage control is not a standard terminology for speed control methods.
B is correct тАФ Field weakening operates in the constant power region because the reduced torque is compensated by increased speed, keeping the total power output constant.
Always remember: Below base speed (armature control) is constant torque; Above base speed (field control) is constant power.