Join 60,000+ competitive exam aspirants
For forced draught the blower is located
At the top of the chimney
Near the base of the chimney
Near the base of the boiler
Any where permissible
Near the base of the boiler
In a forced draught system, a fan or blower is positioned at the base of the boiler to force air into the furnace under pressure. This positive pressure ensures efficient combustion and overcomes the air resistance of the fuel bed and boiler components.
In a forced draught system, a fan or blower is positioned at the base of the boiler to force air into the furnace under pressure. This positive pressure ensures efficient combustion and overcomes the air resistance of the fuel bed and boiler components.
PforcedтАЛ>PatmтАЛ тАФ The pressure inside the furnace is greater than the atmospheric pressure
╬ФPtotalтАЛ=╬ФPgrateтАЛ+╬ФPboilerтАЛ+╬ФPductтАЛ тАФ The blower must overcome the total pressure drop of the system
The blower creates a positive pressure inside the furnace, which pushes the air through the grate, fuel bed, and various heat transfer surfaces (like economizers and air preheaters). Since the pressure inside the furnace is higher than atmospheric pressure, the combustion products are forced toward the chimney without requiring a tall stack for natural draft.
The furnace operates at a pressure higher than atmospheric pressure.
Eliminates the need for a tall chimney since the fan provides the required driving force.
Allows for the use of air preheaters and economizers due to increased static head capability.
Commonly used in large industrial boilers and modern power plants.
Compact furnace design
Independent of atmospheric temperature and chimney height
Higher combustion efficiency
Gas leakage out of the furnace is possible through furnace openings
Requires more power for fan operation
The blower handles relatively cold air, reducing maintenance
Large-scale thermal power stations
Industrial boilers
Systems using high-resistance fuel beds
Option A refers to Induced Draught, where the fan is at the chimney base or top to pull flue gases.
Forced draught is often combined with induced draught to form a 'Balanced Draught' system.
C is correct тАФ For forced draught, the blower is installed at the base of the boiler to push fresh air into the furnace.
Remember that 'Forced' = Pushing (Fan before furnace) and 'Induced' = Pulling (Fan after furnace/at chimney).