Join 60,000+ competitive exam aspirants
The magnitude of natural draught depends upon
Average temperature differences between flue gases within the chimney and the outside air
Height of the chimney above the furnace grate level
Weather and operating conditions
All of above
All of above
Natural draught is the process of inducing airflow through a boiler furnace due to the difference in density between the hot flue gases inside the chimney and the colder ambient air outside. The magnitude of this draught depends on the height of the chimney and the temperature gradient between the flue gas and the atmosphere.
Natural draught is the process of inducing airflow through a boiler furnace due to the difference in density between the hot flue gases inside the chimney and the colder ambient air outside. The magnitude of this draught depends on the height of the chimney and the temperature gradient between the flue gas and the atmosphere.
H=hcтАЛ(╧БgтАЛ╧БaтАЛтАЛтИТ1) тАФ draught head expression in meters of hot gas column
PdтАЛ=gтЛЕHтЛЕ╧БgтАЛ тАФ pressure difference (draught) in Pa
The principle relies on buoyancy: since hot gas is less dense than ambient air, it rises. The difference in pressure created is proportional to the stack height and the density difference. External factors such as wind speed and humidity (weather conditions) also influence the effective pressure head.
Draught is directly proportional to chimney height (hcтАЛ).
Increased temperature difference (TgтАЛтИТTaтАЛ) leads to lower flue gas density and higher draught.
Higher chimney heights allow for greater pressure differences but involve higher construction costs.
Ambient conditions like wind velocity significantly impact the effective draught created.
No external power required for operation
Low maintenance and simple construction
Cannot handle high resistances (thick beds)
Draught capacity is restricted by weather and ambient temperature
Efficiency drops at high loads
Small-scale boilers
Residential furnaces
Low-capacity steam power plants
The flue gas temperature is usually kept between 150┬░C and 200┬░C for optimal operation.
The term 'draught' refers to the pressure difference that causes gas movement.
D is correct тАФ The magnitude of natural draught is a function of chimney height, temperature differential between internal gases and external air, and environmental operating conditions.
In competitive exams, remember that natural draught is always limited; for modern high-capacity thermal plants, forced or induced draught (mechanical) is preferred to overcome high furnace resistance.