Join 60,000+ competitive exam aspirants
The natural draught
Is provided by a chimney
Is used in small steam boilers
Can also be used in large steam boilers of economizers and preheaters have been used
Both (a) and (b)
Both (a) and (b)
Natural draught is produced by a chimney (stack) utilizing the buoyancy effect caused by the difference in density between hot flue gases inside the chimney and cooler ambient air outside. Due to its limited capacity and dependence on atmospheric conditions, it is primarily suitable for small steam boilers or setups where lower draught requirements exist.
Natural draught is produced by a chimney (stack) utilizing the buoyancy effect caused by the difference in density between hot flue gases inside the chimney and cooler ambient air outside. Due to its limited capacity and dependence on atmospheric conditions, it is primarily suitable for small steam boilers or setups where lower draught requirements exist.
P=H(╧БaтАЛтИТ╧БgтАЛ)g тАФ Pressure head generated by the chimney
heqтАЛ=H(╧БgтАЛ╧БaтАЛтАЛтИТ1) тАФ Equivalent height of hot gas column
The chimney acts as a thermal pump. The hot gases, being less dense than the cold ambient air, experience an upward buoyant force. The pressure difference (draught) is given by H(╧БaтАЛтИТ╧БgтАЛ)g, where H is the chimney height, ╧БaтАЛ is the density of air, and ╧БgтАЛ is the density of flue gases.
Natural draught efficiency is typically very low (often < 1%).
It is completely independent of mechanical power, making it reliable but non-adjustable.
The intensity of draught depends directly on the height of the chimney and the temperature difference.
Modern large-scale plants use induced/forced draught fans instead due to the massive flow requirements.
No external power required for fans.
Simple, robust construction with minimal maintenance.
No moving parts, resulting in silent operation.
Efficiency varies with ambient weather and temperature conditions.
Cannot handle high pressure drops across modern economizers or superheaters.
Height required for sufficient draught can be prohibitively large.
Small-capacity steam boilers.
Locomotive boilers.
Domestic heating furnaces.
Option C is technically incorrect for large modern power plants because they require mechanical draught (forced/induced) to overcome the high resistance of modern air pollution control equipment and heat exchangers.
The draught is measured in millimeters of water column (mm of H2тАЛO).
D is correct тАФ Natural draught is exclusively provided by a chimney and is generally confined to small-scale boiler installations due to its low pressure-generating capability.
In power system exams, remember that natural draught is self-regulating but ineffective at high flow resistance; always prefer mechanical draught fans for large thermal power stations.