Join 60,000+ competitive exam aspirants
The draught produced by a chimney of a given height at a given outside temperature
Decreases with the increase in temperature of chimney gases
Increases with the increase in temperature of chimney gases
Remains unchanged irrespective of temperature of chimney gases
May increase or decrease
Increases with the increase in temperature of chimney gases
The draught produced by a chimney is the pressure difference created between the hot, less dense gases inside the chimney and the cold, denser air outside. Increasing the temperature of the chimney gases decreases their density, which increases the pressure difference (draught) until an optimum temperature is reached.
The draught produced by a chimney is the pressure difference created between the hot, less dense gases inside the chimney and the cold, denser air outside. Increasing the temperature of the chimney gases decreases their density, which increases the pressure difference (draught) until an optimum temperature is reached.
hdтАЛ=353.4тЛЕHтЛЕ(TaтАЛ1тАЛтИТTgтАЛ1тАЛ) тАФ Theoretical draught in meters of hot gas column
╬ФP=gтЛЕHтЛЕ(╧БaтАЛтИТ╧БgтАЛ) тАФ Draught pressure difference in Pascals
The chimney acts as a natural pump. The draught pressure is proportional to the difference in weight between a column of cold external air and a column of hot internal gas of the same height. As chimney gas temperature rises, the gas becomes lighter (lower density), creating a larger pressure differential relative to the ambient air, thereby increasing the draught strength.
Draught increases because ╧БgтАЛ (gas density) decreases as TgтАЛ increases.
There is a practical limit to this increase, as very high chimney temperatures lead to excessive heat loss.
Natural draught relies solely on buoyancy due to temperature gradients.
Units: H is in meters, T is in Kelvin.
No external power required for operation
Low maintenance cost
Simple construction
Draught efficiency is dependent on atmospheric weather conditions
Limited magnitude of draught compared to forced draught systems
High heat loss through chimney gases
Small to medium capacity boilers
Domestic heating furnaces
Industrial kilns
The formula shows that as TgтАЛ increases, the term 1/TgтАЛ decreases, making (1/TaтАЛтИТ1/TgтАЛ) larger, hence increasing draught.
Option A is incorrect as increasing the temperature reduces density, which helps the draught, not hinders it.
B is correct тАФ The draught increases with the increase in temperature of chimney gases because the density of the gases becomes lower, increasing the buoyant force.
Always remember that in natural draught systems, efficiency is improved by higher chimney stacks and higher flue gas temperatures, though the latter must be balanced against thermal efficiency requirements.