Join 60,000+ competitive exam aspirants
The artificial draught is usually designed to produce
More draught
Less smoke
Low temperature of chimney gas
All of above
Low temperature of chimney gas
Artificial draught is a mechanical method using fans or steam jets to create the necessary pressure difference for boiler combustion. By controlling the airflow mechanically rather than relying on chimney height or temperature, it enables higher combustion rates, increased plant efficiency, and better emission control.
Artificial draught is a mechanical method using fans or steam jets to create the necessary pressure difference for boiler combustion. By controlling the airflow mechanically rather than relying on chimney height or temperature, it enables higher combustion rates, increased plant efficiency, and better emission control.
PdтАЛ=gcdotH(╧БaтАЛтИТ╧БgтАЛ) тАФ natural draught pressure principle
╬ФPtotalтАЛ=PforcedтАЛ+PinducedтАЛ тАФ total mechanical draught pressure
Artificial draught overcomes the limitations of natural draught by providing a consistent air supply regardless of ambient conditions. It forces air into the furnace (forced draught) or extracts flue gases (induced draught), allowing for a thinner fuel bed and higher fuel consumption without requiring a massive, high-temperature chimney. This mechanical control allows the heat to be extracted more thoroughly from the combustion gases before they exit.
Artificial draught is independent of atmospheric temperature and chimney height.
It allows the use of economizers and air preheaters which lower exit gas temperature.
Higher draught pressure enables burning of low-grade fuels and reduces excess air requirements.
Combustion control is much more precise compared to natural chimney-based draught.
Higher combustion efficiency
Reduced smoke and particulate emissions
Increased boiler capacity
Precise control over furnace atmosphere
High initial capital investment
Maintenance requirement for mechanical fans
Consumes auxiliary electrical power
Large-scale thermal power stations
Locomotives
Industrial high-pressure boilers
Induced draught (ID) fans handle hot gases and are typically placed after the air preheater.
Forced draught (FD) fans handle cold air and are located before the furnace.
Option C is correct because artificial draught extracts more heat via preheaters, leaving less heat to be wasted out the chimney.
D is correct тАФ Artificial draught provides greater control over airflow and pressure, which improves combustion, lowers fuel waste (smoke), and allows for greater heat extraction from flue gases.
Remember that while natural draught relies on H (height) and ╬ФT, artificial draught systems allow for the decoupling of thermal efficiency from physical structure size.