Join 60,000+ competitive exam aspirants
For the same draught produced the power of forced draught fan, in comparison to that of induced draught fan, is
More
Less
Same
May be more or less
Less
The power consumption of a fan is directly proportional to the mass flow rate and the pressure head (draught). A forced draught (FD) fan handles cold, dense air, whereas an induced draught (ID) fan handles hot, dilute flue gases, resulting in lower power requirements for FD fans for the same mass flow and pressure conditions.
The power consumption of a fan is directly proportional to the mass flow rate and the pressure head (draught). A forced draught (FD) fan handles cold, dense air, whereas an induced draught (ID) fan handles hot, dilute flue gases, resulting in lower power requirements for FD fans for the same mass flow and pressure conditions.
P=╬╖QтЛЕ╬ФpтАЛ тАФ Power consumption formula where Q is volume flow and ╬Фp is draught
╧Б=RTPтАЛ тАФ Density relationship showing flue gas (high T) is less dense than ambient air
The power required for a fan is given by P=╬╖QтЛЕ╬ФpтАЛ, where Q is the volume flow rate. Because flue gas in an ID fan has a significantly higher temperature and volume than the ambient air in an FD fan, the ID fan must move a larger volume of gas to achieve the same mass flow, leading to higher power consumption. Consequently, for the same pressure difference (draught) and mass throughput, the FD fan consumes less power because it processes a denser medium.
FD fans handle ambient air which is denser than flue gas.
ID fans operate at high temperatures, significantly increasing the volume flow rate for a fixed mass flow.
Power consumption scales with the volume of the fluid being handled.
ID fans typically require more robust construction due to exposure to fly ash and high temperatures.
FD fan: Handles clean air, leading to longer blade life.
FD fan: Lower power requirement compared to ID fan.
ID fan: High maintenance due to erosion from ash particles.
ID fan: Higher initial cost and operational power cost.
Power plant boiler combustion air supply.
Industrial furnace draft systems.
| Feature | FD Fan | ID Fan |
|---|---|---|
Fluid Handled | Ambient Air | Hot Flue Gases |
Density | High | Low |
Power Input | Less | More |
The draught requirement is determined by the pressure drop across the boiler, superheater, economizer, and air preheater.
Option A is incorrect because the density of flue gas is lower, requiring a higher volume flow.
B is correct тАФ The forced draught (FD) fan handles denser air, requiring less volume flow and thus less power than an induced draught (ID) fan for the same pressure difference.
Always remember that fan power is directly related to the volume flow rate; for gases, volume flow increases with temperature for a constant mass flow.