Join 60,000+ competitive exam aspirants
If the terminal voltage of one 1000 rpm shunt motor is reduced to half, the speed of the motor will be _____________
250
500
1000
2000
1000
In a DC shunt motor, the speed is directly proportional to the back EMF and inversely proportional to the flux per pole. Since both the terminal voltage and the shunt field excitation are reduced by the same factor, the flux remains proportional to the voltage, keeping the speed constant.
In a DC shunt motor, the speed is directly proportional to the back EMF and inversely proportional to the flux per pole. Since both the terminal voltage and the shunt field excitation are reduced by the same factor, the flux remains proportional to the voltage, keeping the speed constant.
NтИЭ╬жEbтАЛтАЛ тАФ Fundamental speed equation for DC motors
╬жтИЭIfтАЛ=RfтАЛVтАЛ тАФ Flux relation in a shunt motor
The speed of a DC motor is given by N=KтЛЕ╬жEbтАЛтАЛ. In a shunt motor, EbтАЛтЙИV and ╬жтИЭIfтАЛ=RfтАЛVтАЛ. Substituting these, we get NтИЭV/RfтАЛVтАЛ=RfтАЛ. Since field resistance RfтАЛ is constant, the speed N remains independent of the terminal voltage V provided the motor is unloaded or operating linearly.
In a DC shunt motor, the field winding is connected in parallel with the armature.
Changing the terminal voltage affects both the back EMF and the field current simultaneously.
The speed of a DC shunt motor is independent of the applied voltage if the magnetic circuit is unsaturated.
Constant speed operation
Simple speed control via field rheostat
Speed drops significantly if the shunt field is accidentally opened
Limited starting torque compared to series motors
Lathe machines
Centrifugal pumps
Blowers and fans
If the motor is loaded, a change in voltage causes a change in current, which might affect speed slightly due to IaтАЛRaтАЛ drop.
Option B (500) would be the answer if only the armature voltage were reduced while flux remained constant, as in an armature voltage control method.
C is correct тАФ Since the shunt field flux is proportional to the terminal voltage, reducing the voltage reduces both back EMF and flux by the same ratio, leaving the speed unchanged.
Always verify if the field circuit is affected by the voltage change; in series motors, speed changes drastically with voltage, but in shunt motors, it is inherently self-compensating.