Join 60,000+ competitive exam aspirants
If there is flow of real fluid at fixed boundary, then no-slip condition:
depends on the type of flow
may or may not occur
occurs
does not occur
occurs
In fluid mechanics, the no-slip condition states that a real fluid (viscous fluid) in contact with a fixed boundary has zero relative velocity with respect to that boundary. Consequently, at the solid-fluid interface, the fluid velocity is exactly equal to the boundary velocity.
In fluid mechanics, the no-slip condition states that a real fluid (viscous fluid) in contact with a fixed boundary has zero relative velocity with respect to that boundary. Consequently, at the solid-fluid interface, the fluid velocity is exactly equal to the boundary velocity.
u=0 at y=0 тАФ where u is the velocity of the fluid and y is the distance from the wall.
╧Д=╬╝dyduтАЛ тАФ Newton's law of viscosity, where the velocity gradient exists due to the no-slip condition.
The no-slip condition arises due to the molecular interactions between the fluid particles and the boundary surface. When a real fluid flows past a stationary solid, the adhesive forces between the fluid molecules and the wall surface, combined with the fluid's internal viscosity (resistance to deformation), cause the layer of fluid directly in contact with the wall to adhere to it, resulting in a velocity of zero.
The no-slip condition is a fundamental assumption for the Navier-Stokes equations.
Real fluids always possess viscosity, which makes the no-slip condition applicable in practical engineering scenarios.
The no-slip condition leads to the formation of a boundary layer where velocity varies from zero at the wall to the free-stream velocity.
The condition is generally valid for continuum fluid mechanics but may break down for rarefied gas flows at high Knudsen numbers.
Allows for the mathematical modeling of velocity profiles near surfaces.
Enables the calculation of wall shear stress and skin friction drag.
Cannot be applied to idealized 'inviscid' or 'perfect' fluids.
Requires complex boundary layer analysis in high-speed or micro-scale flows.
Aerodynamic design of wings and fuselages.
Pipe flow analysis for calculating pressure drop.
Heat transfer calculations in boundary layers.
The no-slip condition is a boundary condition applied specifically to real (viscous) fluids.
Option A is incorrect because the condition applies to all standard viscous flows. Option B is incorrect as it is a fundamental property of real fluids. Option D is incorrect because it describes an ideal inviscid flow, not a real fluid flow.
C is correct тАФ For a real fluid in contact with a fixed boundary, the no-slip condition always occurs as a consequence of fluid viscosity.
Remember that the no-slip condition is the bedrock of boundary layer theory; without it, velocity gradients and viscous shear stress cannot be defined near solid surfaces.