Join 60,000+ competitive exam aspirants
Improving power factor
Reduces current for given output
Increases loss in line
Increases the cost of equipment
All of above
Reduces current for given output
Improving the power factor reduces the reactive component of the current supplied by the source for a given real power output. Since the total current is the phasor sum of active and reactive components, a lower reactive current results in a smaller total line current (I=Vcos╧ХPтАЛ).
Improving the power factor reduces the reactive component of the current supplied by the source for a given real power output. Since the total current is the phasor sum of active and reactive components, a lower reactive current results in a smaller total line current (I=Vcos╧ХPтАЛ).
P=VIcos╧Х тАФ Relationship between real power, voltage, current, and power factor
I=Vcos╧ХPтАЛ тАФ Total current as a function of power factor
In an AC circuit with inductive loads, the current lags the voltage by an angle ╧Х. By adding capacitors in parallel (power factor correction), we supply the necessary reactive power (Q) locally. This reduces the reactive current IrтАЛ=Isin╧Х that must be supplied by the source, thereby decreasing the total current I=Ip2тАЛ+Ir2тАЛтАЛ.
Power factor is defined as the cosine of the phase angle between voltage and current.
Lagging power factor is caused by inductive loads like motors and transformers.
Leading power factor is achieved by adding capacitor banks in parallel.
Improving power factor towards unity increases the efficiency of the power system.
Reduced I2R line losses
Increased transmission capacity of lines
Improved voltage regulation
Reduction in electricity bill penalties
Initial capital expenditure for capacitor banks
Maintenance of switching equipment for capacitors
Risk of over-compensation leading to high leading voltage
Industrial motor drives
Distribution substations
Large commercial buildings
Unity power factor (cos╧Х=1) represents the ideal condition where voltage and current are in phase.
Option B is incorrect because improved power factor decreases current, which consequently decreases line I2R losses.
Option C is generally incorrect as the savings in energy bills and reduced conductor size typically outweigh the cost of correction equipment.
A is correct тАФ Improving the power factor reduces the total current drawn from the supply for the same real power output, which minimizes losses and improves system capacity.
In competitive exams, remember that I2R loss is directly proportional to the square of the current; thus, even a small improvement in power factor significantly reduces heat dissipation in conductors.