Join 60,000+ competitive exam aspirants
In comparison to diesel power plant the gas turbine power plant has
Lower overall thermal efficiency
Higher overall thermal efficiency
Same overall thermal efficiency
Unpredictable
Lower overall thermal efficiency
Gas turbine power plants generally exhibit lower overall thermal efficiency compared to diesel power plants due to the high energy loss in exhaust gases and the significant power consumed by the compressor for air compression. While diesel engines operate on high-compression ignition cycles with high peak pressures, gas turbines are limited by metallurgical constraints on the turbine inlet temperature.
Gas turbine power plants generally exhibit lower overall thermal efficiency compared to diesel power plants due to the high energy loss in exhaust gases and the significant power consumed by the compressor for air compression. While diesel engines operate on high-compression ignition cycles with high peak pressures, gas turbines are limited by metallurgical constraints on the turbine inlet temperature.
╬╖thтАЛ=1тИТr╬│тИТ11тАЛ тАФ General thermal efficiency relation for Brayton cycle
WnetтАЛ=WturbineтАЛтИТWcompressorтАЛ тАФ Net work output definition
The gas turbine operates on the Brayton cycle, which involves continuous combustion and expansion. A significant portion (often 50% to 65%) of the turbine's generated work is consumed by the attached air compressor, drastically reducing the net output. In contrast, a diesel engine (operating on the Diesel or Dual cycle) achieves higher compression ratios, leading to higher thermal conversion efficiency.
Gas turbines are limited by the maximum allowable temperature of the turbine blades.
Diesel engines operate at much higher compression ratios resulting in better thermal efficiency.
Exhaust heat recovery (cogeneration) is often required in gas plants to improve practical efficiency.
The compressor in a gas turbine is a major internal load.
Lower initial capital cost
High power-to-weight ratio
Rapid start-up capability
Lower thermal efficiency
High sensitivity to ambient air temperature
Expensive metallurgy required for high temperatures
Peak load power generation
Aviation propulsion
Emergency standby power
| Feature | Gas Turbine | Diesel Engine |
|---|---|---|
Typical Thermal Efficiency | 25% - 35% | 35% - 45% |
The overall efficiency of gas turbines can be improved using regenerative cycles, intercooling, and reheating.
Option B is incorrect as diesel engines utilize the high-pressure compression ignition process, which naturally yields higher thermodynamic efficiency than the open-cycle gas turbine.
A is correct тАФ The gas turbine power plant has lower overall thermal efficiency compared to the diesel power plant primarily due to the high work input required by the compressor.
Always remember that in thermal power cycles, efficiency is inversely proportional to heat rejection losses and internal work consumption; gas turbines suffer more from the latter.