Join 60,000+ competitive exam aspirants
Insulation resistance test is preformed on power line with
Ohm meter
Earth tester
Megger
Any of above
Megger
The insulation resistance of power cables or transmission lines is measured using a Megger (Megohmmeter). It is a high-resistance measuring instrument that utilizes a high DC voltage to detect leakage current through insulation, providing a reading in Mega-ohms.
The insulation resistance of power cables or transmission lines is measured using a Megger (Megohmmeter). It is a high-resistance measuring instrument that utilizes a high DC voltage to detect leakage current through insulation, providing a reading in Mega-ohms.
R=IVтАЛ тАФ Ohm's Law governing the measurement principle
IleakageтАЛ=RinsulationтАЛVтАЛ тАФ Leakage current calculation
A Megger consists of a DC generator or electronic voltage source and a moving coil meter. When the crank is rotated (or battery activated), a test voltage (typically 500V, 1kV, or 5kV) is applied across the insulation. The current flowing through the insulation is proportional to the resistance; the meter deflects accordingly, showing the insulation health as R=IVтАЛ.
Meggers operate at high DC voltages to detect hidden dielectric cracks.
The reading represents the sum of volume and surface leakage resistance.
Values are typically in the range of M╬й to G╬й.
Proper discharge of the cable after testing is mandatory for safety.
Portable and easy to use in field conditions.
Provides a direct reading of resistance in high ranges.
High DC voltage can potentially damage weak insulation if not handled correctly.
Sensitive to temperature and humidity variations.
Routine testing of electrical machines and transformers.
Diagnostic checks for transmission line insulation integrity.
Standard requirement for insulation resistance in low voltage systems is often 1 M╬й per 1000V of operating voltage.
Option B (Earth Tester) is specifically designed to measure earth electrode resistance using the fall-of-potential method, not general insulation resistance.
C is correct тАФ The Megger is specifically designed to measure high insulation resistance by providing a calibrated high DC voltage and measuring the resulting tiny leakage current.
Always remember: Megger for insulation (M╬й), Earth Tester for grounding resistance (╬й), and Ohm meter for low-resistance continuity testing.