Join 60,000+ competitive exam aspirants
The short length of conductor used to connect the line conductor on one side of the terminal pole to the line conductor on the other side of pole is knoen as
Jumper
Petticoat
Guard
Guy
Jumper
A jumper is a short-length flexible conductor used at terminal poles, dead-end structures, or tension locations in overhead transmission and distribution lines. It provides electrical continuity between the conductors on either side of the pole where they are mechanically anchored.
A jumper is a short-length flexible conductor used at terminal poles, dead-end structures, or tension locations in overhead transmission and distribution lines. It provides electrical continuity between the conductors on either side of the pole where they are mechanically anchored.
IcapacityтАЛтЙеIloadтАЛ тАФ The jumper must be rated for current carrying capacity higher than the peak line load to prevent overheating.
At a terminal or section pole, line conductors are mechanically terminated using disc insulators to prevent continuous tension. Since the conductors are physically separated by these insulators, an electrical path is established using a jumper wire to maintain circuit continuity across the pole structure.
Jumpers are essential for maintaining potential across dead-end poles.
They are usually made of the same material as the line conductor (ACSR, AAAC).
Proper clearance from the pole body must be maintained to prevent flashovers.
Jumper tension is kept low to prevent mechanical stress on the terminals.
Enables sectioning of transmission lines for maintenance.
Provides flexibility for tap-off connections.
Potential site for corona discharge if not terminated correctly.
Acts as a weak point if subjected to heavy wind or ice loading.
Dead-end poles in distribution systems.
Sectionalizing switches in transmission networks.
Transition points between overhead lines and underground cables.
Petticoat refers to the underside shape of a pin insulator.
Guard wire is used for lightning protection (shielding).
Guy wire provides mechanical support to poles to counteract tension.
A is correct тАФ A jumper is the flexible conductor used to maintain electrical continuity across terminal or dead-end poles.
In exams, always distinguish between electrical continuity components (Jumpers) and structural support components (Guys/Stays).