Join 60,000+ competitive exam aspirants
Laminated wood offers several advantages over solid wood. Which of the following is NOT an advantage of laminated wood?
Individual boards, which are used in laminated wood due to their relative thinness, can be properly dried without checking (cracking) and defects, such as knots, can be removed.
It can be used to fabricate large members that are impossible to be made from solid wood.
Since laminated wood is glued, wood of only large dimensions can be used, which increases the amount of waste.
Structures can be designed with laminated wood based on the required strength and low-grade wood can be positioned accordingly.
Structures can be designed with laminated wood based on the required strength and low-grade wood can be positioned accordingly.
Laminated wood, also known as Glulam (Glued Laminated Timber), involves bonding thin wood laminae with adhesives. Option C is the correct answer to the question 'Which of the following is NOT an advantage' because laminated wood actually reduces waste by allowing the use of small-dimension wood pieces, contrary to the claim in that option.
IS 11415:1985
Laminated wood, also known as Glulam (Glued Laminated Timber), involves bonding thin wood laminae with adhesives. Option C is the correct answer to the question 'Which of the following is NOT an advantage' because laminated wood actually reduces waste by allowing the use of small-dimension wood pieces, contrary to the claim in that option.
ElamтАЛ=ItotalтАЛтИСEiтАЛIiтАЛтАЛ тАФ Effective modulus of elasticity for a laminated section, where EiтАЛ and IiтАЛ are the properties of individual laminae.
The principle relies on stress distribution within the cross-section. By finger-jointing or edge-gluing smaller sections, engineers can create large, structural members with controlled defect placement. This process mitigates the natural limitations of solid logs, such as size constraints and localized strength reductions caused by natural knots or drying checks.
Laminated wood enables the use of short or narrow timber pieces that would otherwise be discarded.
Glulam members exhibit higher structural uniformity compared to solid timber of the same dimensions.
Moisture content is more easily controlled in thin laminae, reducing the probability of internal checking.
Adhesives used must provide a bond strength equal to or greater than the shear strength of the wood itself.
Ability to fabricate large-span structural members.
Superior strength-to-weight ratio.
Elimination of natural defects like knots via selective removal.
Uniformity in structural properties.
High cost of specialized adhesives and machinery.
Sensitivity to moisture variations if adhesive degradation occurs.
Requires professional fabrication and precise quality control.
Long-span roof beams and trusses.
Arch structures for auditoriums and sports halls.
Bridge girders.
Heavy load-bearing columns.
Option C is factually incorrect because lamination is a technique specifically employed to increase wood yield by utilizing smaller timber sections, rather than restricting use to large dimensions which would increase waste.
Options A, B, and D are valid technical advantages of using engineered wood products.
High-grade wood is typically placed in outer laminations where bending stresses are maximum, and low-grade wood is placed in inner regions to optimize cost and performance.
C is correct тАФ Laminated wood actually reduces wood waste by allowing the utilization of small-dimension timber, making the statement in Option C an inaccurate description of an advantage.
When evaluating 'NOT' questions in civil engineering, look for statements that contradict basic material economic principles, like waste reduction in recycling or engineered products.