Join 60,000+ competitive exam aspirants
Which of the given procedures should be followed before applying paint onto different components of a building? i) Chalking ii) Flaking iii) Removing blisters iv) Surface wetting
(ii) and (iii)
(i), (ii) and (iii)
Only (i)
All of (i), (ii), (iii) and (iv)
All of (i), (ii), (iii) and (iv)
Before applying paint, it is essential to ensure that the substrate is sound, clean, and dry to ensure proper adhesion and longevity of the paint film. This involves treating surface defects like chalking and flaking, removing existing paint failures such as blisters, and providing a controlled surface moisture level.
IS 2338: Part 1 - Code of Practice for Finishing of Wood and Wood-Based Materials, and IS 1477: Code of Practice for Painting of Ferrous Metals.
Before applying paint, it is essential to ensure that the substrate is sound, clean, and dry to ensure proper adhesion and longevity of the paint film. This involves treating surface defects like chalking and flaking, removing existing paint failures such as blisters, and providing a controlled surface moisture level.
Adhesion┬аForceтИЭSurface┬аCleanliness
Surface┬аEnergyтЙИSubstrate┬аSurface┬аCondition
Surface preparation aims to eliminate contaminants and loose particles that hinder mechanical bonding between the paint and the substrate. Chalking (powdering of pigment) must be neutralized; flaking and blisters represent loss of adhesion which, if not scraped, will lead to premature failure of new layers. Surface wetting is occasionally required on masonry substrates to regulate suction and ensure an even application of cement-based or lime-based paints.
Chalking is caused by the degradation of the paint binder due to UV exposure.
Blistering is typically caused by trapped moisture or gases underneath the paint film creating osmotic pressure.
Proper surface preparation accounts for nearly 80% of the total success of a paint job.
Removing flaking paint prevents 'bridging' where new paint covers a weak layer that will eventually detach.
Ensures uniform color and sheen
Prevents premature peeling and blistering
Increases the effective service life of the paint coating
Increases initial labor costs
Time-consuming site preparation
Requires skilled manual labor for effective scraping and surface preparation
Internal and external wall painting
Structural steel protection
Wooden joinery finishing
Chalking is identified by a powdery residue remaining on the fingers when the surface is rubbed.
Surface wetting (dampening) is specifically critical for surfaces like brickwork or concrete before applying water-based distempers or cement paints to prevent the substrate from absorbing binder water too quickly.
D is correct тАФ All listed procedures are standard preparatory steps in painting to ensure a stable, clean, and moisture-balanced surface for coating application.
Always remember that in Civil Engineering examinations, surface preparation is considered the most critical factor for coating durability, often prioritized over the paint quality itself.