Join 60,000+ competitive exam aspirants
Which of the following indicates a preliminary stage of dead knot, where the fibres of knot are not firmly held in the surrounding wood?
Tight knot
Round knot
Loose knot
Dead knot
Loose knot
A loose knot is characterized by the lack of structural continuity between the knot and the surrounding timber fibers. It occurs when a branch dies while the tree is still growing, and subsequent wood growth does not enclose the knot tightly, leading to a gap or looseness.
IS 1150:2000 (Classification of Timber)
A loose knot is characterized by the lack of structural continuity between the knot and the surrounding timber fibers. It occurs when a branch dies while the tree is still growing, and subsequent wood growth does not enclose the knot tightly, leading to a gap or looseness.
Effective┬аStrengthтЙИClear┬аWood┬аStrength├Ч(1тИТk) where k is the reduction factor due to knots.
During the tree growth cycle, if a branch dies or breaks, it becomes non-living tissue. As the tree trunk diameter increases, the cambium layer deposits new wood around the dead branch stump. Since the stump is dead, there is no fusion between the new wood cells and the branch wood, creating a physical discontinuity that makes the knot loose.
Knots significantly reduce the structural strength of timber by disrupting the orientation of wood fibers.
Loose knots are often considered more severe than tight knots because they do not contribute to the shear strength or structural integrity of the member.
The presence of knots creates localized stress concentrations under load.
Reduced structural load-bearing capacity.
Risk of knot falling out, creating a hole.
Susceptibility to moisture ingress and decay around the loose area.
Structural wood grading.
Quality control in sawmilling.
Assessment of timber for joinery and carpentry works.
A tight knot is one that is firmly held in place by growth rings and is generally acceptable in moderate quantities for structural timber.
A dead knot (often called an encased knot) may or may not be loose, but the term specifically refers to a knot that is not physically integrated with the surrounding wood grain.
IS 1150 defines various timber defects including knots, shakes, and splits to categorize commercial wood quality.
C is correct тАФ A loose knot is the preliminary stage where the knot is not integrated with the grain, causing it to be held loosely or not at all in the surrounding wood.
In competitive exams, remember that knots always decrease the strength of wood perpendicular to the grain more significantly than parallel to the grain, as they disrupt tension members.